9920228653

Linkedin
Instagram
317L Round Bar

A36 + Inconel

Home 9 CLADDED PLATES 9 A36 + INCONEL
A36 + Inconel<br />

A36 + Inconel Plates, manufacturers, suppliers, exporters, traders, dealers, manufacturing companies, retailers, producers.

A36 + INCONEL, A36 + INCONEL Structural Steel Plate,  A36 Steel Plates Supplier In India, A36 Pressure Vessel Plate, A36 Mild Steel Plates, A36 Carbon Structural Steel Plate Manufacturer In India, A36 Low Carbon Steel HR Plates, A36 MS Plates Cold Rolled Plates, ASTM A36 Carbon Structural Steel Industrial Plates, Plates Manufacturers And Suppliers In Mumbai, India

Detailed Information:

In the high-quality A36 + INCONEL field, RatnaExports.com can be regarded as one of the industry’s most trustworthy and reliable names, manufacturers, traders, and suppliers. A36 is the more cost-effective metal of the two metals. It has a minimum yield strength of 36,000 PSI and a minimum tensile strength of 58,000 PSI. However, it does not have the same strength as hot-rolled or cold-rolled steel. As part of structural applications, it is also commonly bolted and riveted. As a result, high-strength bolts have largely replaced structural steel rivets in construction. 

Hot-rolled steel products such as A36 + INCONEL are the most commonly used materials in construction. Carbon structural steel can be classified as round rod steel, an angle bar, and steel sections such as I-beams, H-beams, angles, and channels. ASTM A36 hot-rolled steel has a rough surface on the final product, which makes it easy for further processing, such as machining.

ASTM A36 + INCONEL can be manufactured into a wide variety of structural steel parts, which are widely used in different industries for various applications, which is why ASTM A36 is widely used. A36 steel is also used for bridge construction because of its high strength, toughness, and good mechanical properties. For example, it is used to build a lot of bridges. Buildings are typically constructed from A36 steel because of their good mechanical properties. Furthermore, the use of A36 + INCONEL is also widely used in the automotive, construction, heavy equipment, oil and gas fields, as well as in the aerospace industry.

Chemical Composition of A36 + INCONEL

С

Si

Mn*

S

P

Cu**

≤ 0.26

≤ 0.40

~

≤ 0.05

≤ 0.04

≥ 0.20

Mechanical Properties of A36 + INCONEL

Yield strength, MPa (min)

Tensile strength, MPa

Elongation (sample 200 mm),% (min)

250

400-550

20

A36 + INCONEL Equivalent Grade

A36 steel plate is similar in many ways to EN S275 steel plate, in that it is a very low carbon steel alloy that has great strength with formability. It is safe to weld with minimum precaution and can be welded with no problem. The structural steel plate can also be galvanized to improve corrosion resistance, ensuring excellent quality.

Typical Standards

FORMAT

GRADE

SIZES ROUTINELY STOCKED (IMPERIAL UNITS)

Thickness

Width

Length

Coil

SA36

3/16″ – 1/2″

84″, 96″

Any

Cut to Length

SA36

3/16″ – 1/2″

84″ – 96″

Any

Hot Rolled (Strip Mill)

A36 / SA36

3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″

48″, 60″, 72″

Any

Discrete (Mill Rolled)

A36 / SA36

3/16″, 1/4″, 5/16″

84″ – 120″

240″ – 480″

Discrete (Mill Rolled)

A36 / SA36

3/8″ – 12″

72″ – 144″

240″ – 480″

 

A36 + INCONEL Advantages

As a low carbon and structural steel plate, ASTM A36 has been widely used as part of the construction of oil rigs as well as in forming bins, tanks, bearing plates, rings, jigs, cams, forgings, templates, gears, base plates, stakes, fixtures, sprockets, forgings, brackets, ornamental works, stakes, agricultural equipment, automotive equipment, machinery parts and frames as well. Various parts are also made from this steel plate by flame cutting. In addition to walkways, boat ramps, parking garages, and trenches, this alloy is also malleable enough to be used as a cable and a reinforcing bar. The alloy is either used as a cable or as a reinforcing bar. ASTM, the American Society for Testing, strictly governs this steel. Lindenhurst improves corrosion resistance, a member of ASTM.

Good machinability and weldability

The average surface cutting feed of this A36 steel plate are 120 feet per minute, and the machinability rate is 72 percent. ASTM steel plate is an easy metal to weld and can be welded with any type of welding method, and the welds and joints created are of excellent quality. The steel plate can be heated using standard carburizing and hardening methods for AISI 1018 steel.

Heat treatment methods and performances for A36 steel plate.

An ASTM A36 steel plate can be normalized between 899°C and 954°C, annealed between 843°C and 871°C, or between 1550°F and 1600°C. A stress relief process takes place at 677°C to 927°C, which is 1250°F to 1700°C, a carburizing process at 899°C to 927°C, 1650°F to 1700°F, and a hardening process at 788°C to 816°C, or 1450°F to 1500°F. Hardening is strongly required when hardness and strength are the desired prime properties in design. Usually, the normalization treatment is done as the last step in the manufacturing process after the product has been manufactured.

The stress can be increased beyond the yield strength of this steel plate without causing it to deform steadily, so bridges, buildings, and any other structures will stand for long periods before collapsing so that their inhabitants can escape. This steel plate has a bending stress of 22,000 psi and a yield strength of 36,000 psi.

Value Added Service

Material Testing:

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test

Documentation & Packaging:

  • Commercial Invoice including HS Code
  • Packing List including Complete Details
  • Certificate of Origin legalized
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Material Test Certificates (MTC)
  • Guarantee Letter
  • NABL-approved Laboratory Test Reports

A36 + INCONEL Available Forms

  • ASTM A36 Coils
  • ASTM A36 UNS K02600 Coils
  • A36 WERKSTOFF NR. 50049 3.1 Coils
  • A36 Strips
  • ASTM A36 UNS K02600 Strips
  • A36 WERKSTOFF NR. 50049 3.1 Strips
  • ASTM A36 Foils
  • A36 UNS K02600 Foils
  • A36 WERKSTOFF NR. 50049 3.1 Foils
  • ASTM A36 Shim Sheet
  • ASTM A36 UNS K02600 Shim Sheet
  • A36 WERKSTOFF NR. 50049 3.1 Shim Sheet

Types of A36 + INCONEL

  • ASTM A36 Steel Polished Sheets
  • UNS K02600 Polished Sheets
  • WERKSTOFF NR. 50049 3.1 Polished Sheets
  • ASTM A36 Steel Hot Rolled Sheets
  • ASTM A36 Steel Cold Rolled Sheets
  • ASTM A36 Steel Sheets
  • ASTM A36 Steel Shim Sheets
  • ASTM A36 Steel Perforated Sheets
  • ASTM A36 Steel Class 1 Sheets
  • ASTM A36 Steel Plates
  • WERKSTOFF NR. 50049 3.1 Hot Rolled Plates
  • ASTM A36 Steel Chequered Plates
  • UNS K02600 Cold Rolled Plates
  • WERKSTOFF NR. 50049 3.1 Cold Rolled Plates
  • ASTM A36 Steel Polished Plates
  • ASTM A36 UNS K02600 Polished Plates
  • WERKSTOFF NR. 50049 3.1 Polished Plates
  • ASTM A36 Hot Rolled Plates
  • ASTM A36 Steel Cold Rolled Plates
  • ASTM A36 Steel Class 1 Plates

Countries We Export:

Cities We Supply:

London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing,  Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston,  Zurich,  Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City,  Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow