Forged Flanges 904L
ASTM A182 F904L Forged Elbow and SS 316 Socket Weld Tee manufacturer
Stainless Steel Forged Flange 904L Manufacturer & Stainless Steel Forged Flange 904L Supplier
Detailed Information:
The RatnaExports.com Company is one of the leading manufacturers, exporters, and suppliers of Forged Flanges 904L manufactured according to ASME B16.11 and other standards. We are constantly adding to our diverse product range to serve our valued customers better, which is why we have forged threaded pipe fittings available ex-stock in all primary Stainless Steel grades (ASTM A182, F316L, F904LL) and ASTM A105.
A wide array of forged threaded fittings can be found at our company, including threaded elbows, tees, threaded crosses, threaded bends, threaded couplings, threaded caps, threaded unions, hexagon bushings, square plugs, and hexagon plugs. Additionally, we manufacture and supply fittings of various stainless steel and exceptional Alloy grades that meet your exact specifications.
At our factory, the surface of the stainless steel forged fittings is usually either ground or polished, which in turn assists in removing any traces of oxide from the surface and removing surface decarburization. It is possible to use 316 SS Socket Weld Fittings in continuous service up to a temperature of approximately 1300 °F, where scaling becomes excessive when exposed to high temperatures. Furthermore, these ASTM A182 F904L Bushing & Couplings are suitable for intermittent service at temperatures as high as 1500 °F. Can use Them intermittently at temperatures as high as the eves.
A suitable fitting, in this case, the Stainless Steel 904L Forged Tee, will be able to store and handle acetic acid. As oxygen protects the metal under such conditions, even though it offers the highest corrosion resistance, the ASTM A182 SS Forged Elbow is especially helpful in solutions containing acetic acid and formic acid or in solutions where aeration is not possible.
Stainless Steel Forged Flanges Specification List
| Size Chart | 1/2″(15 NB) to 48″ (1200 NB) |
| Pressure Rating Chart ANSI | 150 LBS, 300 LBS, 2500 LBS, 900 LBS, 600 LBS, 1500 LBS |
| UNI / EN | 16 Bar 6 Bar 40Bar 10 Bar 25Bar |
| Manufacturer of Connect Type/ Flange Face Type | RF, RTJ, FF, LJF, Small Tongue, Large Tongue & Groove |
| JIS | 16 K, 5K, 10 K, 20 K, 30 K, 40 K, 63 K |
| Coating | Yellow Transparent, Zinc Plated, Anti-rust Paint, Oil Black Paint, Cold, and Hot Dip Galvanised |
| Origin | West Europe / Japan / India / USA / Korean |
| DIN Pressure Calculation | 25Bar 40Bar 16 Bar 6 Bar 10 Bar / PN64 PN10 PN25 PN16 PN6 PN40 |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, SABS, NFE, AWWA, EN, etc. |
| Common Types By Manufacturer | Threaded / Screwed / Forged / Plate |
| Equipment | Press machine, Bending machine, Pushing Machine, Sand-blasting machine, electric bevelling machine, etc. |
| Test | Direct-reading Spectrograph, Ultrasonic flaw detector, Magnetic particle detector, X-ray detector, Hydrostatic testing machine |
| Production Grades | 316h SS / 317 SS / 317L SS / 321 SS / 321H SS / 347 SS / 904LH SS / 347H SS / 310s SS / 446 SS / 904LSS / 904LL SS / 316 SS / 316L SS / 310 SS / 347 SS / 904L SS |
| Production Technique Used By Manufacturer | Heat-treated, Forged, and machined |
| Standards Provided By Manufacturer | API7S-43, API605, B16.48, ISO70051, MSS S44, ANSI/ASME B16.5, B16.47 Series A & B, BS4504, BS 10, EN-1092, DIN, API7S-15, JISB2220, BS1560-3.1, ASME/ANSI B16.5/16.36/16.47A/16.47B, EN1092 |
Ferritic Stainless Steel Forged Flanges Chemical Composition
|
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Ti |
Fe |
|
|
904L |
min. |
18.0 |
8.0 |
|||||||||
|
max. |
0.08 |
2.0 |
0.75 |
0.045 |
0.030 |
20.0 |
10.5 |
0.10 |
||||
|
904LL |
min. |
18.0 |
8.0 |
|||||||||
|
max. |
0.030 |
2.0 |
0.75 |
0.045 |
0.030 |
20.0 |
12.0 |
0.10 |
||||
|
904LH |
min. |
0.04 |
18.0 |
8.0 |
||||||||
|
max. |
0.010 |
2.0 |
0.75 |
0.045 |
0.030 |
20.0 |
10.5 |
|||||
|
316 |
min. |
16.0 |
2.03.0 |
10.0 |
||||||||
|
max. |
0.035 |
2.0 |
0.75 |
0.045 |
0.030 |
18.0 |
14.0 |
|||||
|
316L |
min. |
16.0 |
2.03.0 |
10.0 |
||||||||
|
max. |
0.035 |
2.0 |
0.75 |
0.045 |
0.030 |
18.0 |
14.0 |
|||||
|
316TI |
0.08 max |
10.00 14.00 |
2.0 max |
0.045 max |
0.030 max |
16.00 18.00 |
0.75 max |
2.00 3.00 |
||||
|
317 |
0.08 max |
2 max |
1 max |
0.045 max |
0.030 max |
18.00 20.00 |
3.00 4.00 |
57.845 min |
||||
|
SS 317L |
0.035 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
18.00 20.00 |
3.00 4.00 |
11.00 15.00 |
57.89 min |
|||
|
SS 321 |
0.08 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 19.00 |
9.00 12.00 |
0.10 max |
5(C+N) 0.70 max |
|||
|
SS 321H |
0.04 0.10 |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 19.00 |
9.00 12.00 |
0.10 max |
4(C+N) 0.70 max |
|||
|
347/ 347H |
0.08 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 20.00 |
9.0013.00 |
|||||
|
410 |
min. |
11.5 |
||||||||||
|
max. |
0.15 |
1.0 |
1.00 |
0.040 |
0.030 |
13.5 |
0.75 |
|||||
|
446 |
min. |
23.0 |
0.10 |
|||||||||
|
max. |
0.2 |
1.5 |
0.75 |
0.040 |
0.030 |
30.0 |
0.50 |
0.25 |
||||
|
904L |
min. |
19.0 |
4.00 |
23.00 |
0.10 |
|||||||
|
max. |
0.20 |
2.00 |
1.00 |
0.045 |
0.035 |
23.0 |
5.00 |
28.00 |
0.25 |
|||
Stainless Steel Forged Flanges Mechanical Properties
|
Grade |
Elongation |
Density |
Yield Strength (0.2%Offset) |
Melting Point |
Tensile Strength |
|
904L/904LL |
35 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1400 °C (2550 °F) |
Psi 75000 , MPa 515 |
|
904LH |
40 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1400 °C (2550 °F) |
Psi 75000 , MPa 515 |
|
310 / 310S / 310H |
40 % |
7.9 g/cm3 |
Psi 30000 , MPa 205 |
1402 °C (2555 °F) |
Psi 75000 , MPa 515 |
|
904L/ 316H |
35 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1400 °C (2550 °F) |
Psi 75000 , MPa 515 |
|
316L |
35 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1399 °C (2550 °F) |
Psi 75000 , MPa 515 |
|
317 |
35 % |
7.9 g/cm3 |
Psi 30000 , MPa 205 |
1400 °C (2550 °F) |
Psi 75000 , MPa 515 |
|
321 |
35 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1457 °C (2650 °F) |
Psi 75000 , MPa 515 |
|
347 |
35 % |
8.0 g/cm3 |
Psi 30000 , MPa 205 |
1454 °C (2650 °F) |
Psi 75000 , MPa 515 |
|
904L |
35 % |
7.95 g/cm3 |
Psi 32000 , MPa 220 |
1350 °C (2460 °F) |
Psi 71000 , MPa 490 |
Super Ferritic Stainless Steel Forged Flanges Equivalent
|
STANDARD |
AFNOR |
UNS |
EN |
JIS |
BS |
WERKSTOFF NR. |
COST |
|
904L |
Z7CN18‐09 |
S904L00 |
X5CrNi18-10 |
SUS 904L |
904LS31 |
1.4301 |
08Х18Н10 |
|
904 |
Z3CN18‐10 |
S904L03 |
X2CrNi18-9 / X2CrNi19-11 |
SUS 904LL |
3904LS11 |
1.4904L / 1.4307 |
03Х18Н11 |
|
904H |
– |
S904L09 |
– |
– |
– |
1.4301 |
– |
|
310 |
– |
S31000 |
X15CrNi25-20 |
SUS 310 |
310S24 |
1.4841 |
20Ch25N20S2 |
|
310S |
– |
S31008 |
X8CrNi25-21 |
SUS 310S |
310S16 |
1.4845 |
20Ch23N18 |
|
310H |
– |
S31009 |
– |
– |
– |
– |
– |
|
316 |
Z7CND17‐11‐02 |
S31600 |
X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SUS 316 |
316S31 / 316S33 |
1.4401 / 1.4436 |
– |
|
316L |
Z3CND17‐11‐02 / Z3CND18‐14‐03 |
S31603 |
X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
SUS 316L |
316S11 / 316S13 |
1.4404 / 1.4435 |
03Ch17N14M3 / 03Ch17N14M2 |
|
316H |
– |
S31609 |
– |
– |
– |
1.4401 |
– |
|
316Ti |
Z6 CNDT 17‐123 |
S31635 |
X6CrNiMoTi17-12-2 |
SUS 316Ti |
320S31 |
1.4571 |
08Ch17N13M2T |
|
317 |
– |
S31700 |
– |
SUS 317 |
– |
1.4449 |
– |
|
317L |
– |
S31703 |
X2CrNiMo18-15-4 |
SUS 317L |
– |
1.4438 |
– |
|
321 |
– |
S32100 |
X6CrNiTi18-10 |
SUS 321 |
– |
1.4541 |
– |
|
321H |
– |
S32109 |
X12CrNiTi18-9 |
SUS 321H |
– |
1.4878 |
– |
|
347 |
– |
S34700 |
X6CrNiNb18-10 |
SUS 347 |
– |
1.4550 |
08Ch18N12B |
|
347H |
– |
S34709 |
X6CrNiNb18-12 |
SUS 347H |
– |
1.4961 |
– |
|
904L |
Z2 NCDU 25-20 |
N08904 |
X1NiCrMoCu25-20-5 |
SUS 904L |
904S13 |
1.4539 |
STS 317J5L |
Weight Of Stainless Steel Forged Flanges
| NPS (Nominal Pipe Size) | Loose (Lap Joint) | NPT (Threaded) | SORF (Slip-On) | BLRF (Blind) | SWRF (Socket Weld) | WRNR (Weld Neck) |
| ½ | 1 | 1 | 1 | 2 | 2 | 2 |
| 1 | 2 | 2 | 2 | 2 | 2 | 3 |
| 1¼ | 3 | 3 | 3 | 3 | 3 | 3 |
| ¾ | 2 | 2 | 2 | 2 | 2 | 2 |
| 1½ | 3 | 3 | 3 | 4 | 3 | 4 |
| 2½ | 8 | 8 | 8 | 7 | 8 | 10 |
| 2 | 5 | 5 | 5 | 5 | 5 | 6 |
| 3 | 9 | 9 | 9 | 9 | 9 | 11.5 |
| 4 | 13 | 13 | 13 | 17 | 13 | 16.5 |
| 3½ | 11 | 12 | 11 | 13 | 11 | 12 |
| 5 | 15 | 15 | 15 | 20 | 15 | 21 |
| 8 | 30 | 30 | 30 | 47 | 30 | 42 |
| 6 | 19 | 19 | 19 | 27 | 19 | 26 |
| 10 | 43 | 43 | 43 | 70 | 43 | 54 |
| 24 | 275 | 220 | 220 | 430 | 220 | 268 |
| 14 | 105 | 90 | 90 | 140 | 90 | 114 |
| 12 | 64 | 64 | 64 | 123 | 64 | 88 |
| 16 | 140 | 98 | 106 | 180 | 98 | 140 |
| 20 | 195 | 165 | 165 | 285 | 165 | 197 |
| 18 | 160 | 130 | 130 | 220 | 130 | 165 |
| 22 | 245 | 185 | 185 | 355 | 185 | 225 |
Stainless Steel Forged Flanges Pressure And Temperature Ratings
|
Temperature °F |
Class 150 |
Class 600 |
Class 1500 |
Class 400 |
Class 900 |
Class 300 |
Class 2500 |
|
-20 to 100 |
275 |
1440 |
3600 |
960 |
2160 |
720 |
6000 |
|
300 |
205 |
1080 |
2700 |
720 |
1620 |
540 |
4500 |
|
200 |
230 |
1200 |
3000 |
800 |
1800 |
600 |
5000 |
|
400 |
190 |
995 |
2485 |
660 |
1490 |
495 |
4140 |
|
600 |
140 |
875 |
2185 |
580 |
1310 |
435 |
3640 |
|
650 |
125 |
860 |
2150 |
575 |
1290 |
430 |
3580 |
|
500 |
170 |
930 |
2330 |
620 |
1395 |
465 |
3880 |
|
700 |
110 |
850 |
2125 |
565 |
1275 |
425 |
3540 |
|
750 |
95 |
830 |
2075 |
555 |
1245 |
415 |
3460 |
|
850 |
65 |
790 |
1980 |
530 |
1190 |
395 |
3300 |
|
800 |
80 |
805 |
2015 |
540 |
1210 |
405 |
3360 |
|
900 |
50 |
780 |
1945 |
520 |
1165 |
390 |
3240 |
|
950 |
35 |
765 |
1910 |
510 |
1145 |
380 |
3180 |
|
1000 |
20 |
640 |
1605 |
430 |
965 |
320 |
2675 |
|
1100 |
20 |
515 |
1285 |
345 |
770 |
255 |
2145 |
|
1150 |
20 |
400 |
995 |
265 |
595 |
200 |
1655 |
|
1050 |
20 |
615 |
1545 |
410 |
925 |
310 |
2570 |
|
1200 |
20 |
310 |
770 |
205 |
465 |
155 |
1285 |
|
1250 |
20 |
225 |
565 |
150 |
340 |
115 |
945 |
|
1300 |
20 |
170 |
430 |
115 |
255 |
85 |
715 |
|
1400 |
20 |
95 |
240 |
65 |
145 |
50 |
400 |
|
1350 |
20 |
125 |
310 |
80 |
185 |
60 |
515 |
|
1450 |
15 |
70 |
170 |
45 |
105 |
35 |
285 |
|
1500 |
10 |
55 |
135 |
35 |
80 |
25 |
230 |
Chromium Stainless Steel Forged Flange Dimensions In Mm
|
Normal Pipe Size (NPS) Of Flanges |
(I.D.) Inside Diameter |
Thickness Of Raised Face (RF) (T) |
Outside Diameter (O.D.) |
Raised Face (R) |
RF (Raised Face) |
Holes Of Bolts (B) |
H |
T1 |
Thickness Of Flat Face (FF) (T2) |
BC (Circle Of Bolt) |
Bolts Holes Numbers |
|
1/2 |
0.88 |
0.88 |
3.75 |
1.38 |
.063 |
0.62 |
1.50 |
0.50 |
0.82 |
2.62 |
4 |
|
1 |
1.36 |
1.06 |
4.88 |
2.00 |
.063 |
0.75 |
2.12 |
0.63 |
1.00 |
3.50 |
4 |
|
3/4 |
1.09 |
1.00 |
4.62 |
1.69 |
.063 |
0.75 |
1.88 |
.056 |
0.94 |
3.25 |
4 |
|
1-1/4 |
1.70 |
1.06 |
5.25 |
2.50 |
.063 |
0.75 |
2.50 |
0.69 |
1.00 |
3.88 |
4 |
|
2 |
2.44 |
1.31 |
6.50 |
3.62 |
.063 |
0.75 |
3.31 |
0.82 |
1.25 |
5.00 |
8 |
|
1-1/2 |
1.95 |
1.19 |
6.12 |
2.88 |
.063 |
0.88 |
2.75 |
0.75 |
1.13 |
4.50 |
4 |
|
2-1/2 |
2.94 |
1.50 |
7.50 |
4.12 |
.063 |
0.88 |
3.94 |
0.94 |
1.44 |
5.88 |
8 |
|
3 |
3.57 |
1.69 |
8.25 |
5.00 |
.063 |
0.88 |
4.62 |
1.06 |
1.63 |
6.62 |
8 |
|
3-1/2 |
4.07 |
1.75 |
9.00 |
5.50 |
.063 |
0.88 |
5.25 |
1.13 |
1.69 |
7.25 |
8 |
|
4 |
4.57 |
1.88 |
10.00 |
6.19 |
.063 |
0.88 |
5.75 |
1.19 |
1.82 |
7.88 |
8 |
|
5 |
5.66 |
2.00 |
11.00 |
7.31 |
.063 |
0.88 |
7.00 |
1.32 |
1.94 |
9.25 |
8 |
|
18 |
18.18 |
3.50 |
28.00 |
21.00 |
.063 |
1.38 |
21.00 |
2.32 |
3.44 |
24.75 |
24 |
|
6 |
6.72 |
2.06 |
12.50 |
8.50 |
.063 |
0.88 |
8.12 |
1.38 |
2.00 |
10.62 |
12 |
|
8 |
8.72 |
2.44 |
15.00 |
10.62 |
.063 |
1.00 |
10.25 |
1.56 |
2.38 |
13.00 |
12 |
|
10 |
10.88 |
2.62 |
17.50 |
12.75 |
.063 |
1.12 |
12.62 |
1.82 |
2.56 |
15.25 |
16 |
|
12 |
12.88 |
2.88 |
20.50 |
15.00 |
.063 |
1.25 |
14.75 |
1.94 |
2.82 |
17.75 |
16 |
|
14 |
14.14 |
3.00 |
23.00 |
16.25 |
.063 |
1.25 |
16.75 |
2.06 |
2.94 |
20.25 |
20 |
|
20 |
20.20 |
3.75 |
30.50 |
23.00 |
.063 |
1.38 |
23.12 |
2.44 |
3.69 |
27.00 |
24 |
|
16 |
16.16 |
3.25 |
25.50 |
18.50 |
.063 |
1.38 |
19.00 |
2.19 |
3.19 |
22.50 |
20 |
|
22 |
22.22 |
4.00 |
33.00 |
25.25 |
.063 |
1.63 |
25.25 |
2.57 |
3.94 |
29.25 |
24 |
|
24 |
24.25 |
4.19 |
36.00 |
27.25 |
.063 |
1.62 |
27.62 |
2.69 |
4.13 |
32.00 |
24 |
Marking & Packing
For exports, we use wooden cases as standard export packaging, so that the forged fittings are marked with Grade, Lot number, Size, Degree, and our trademark. To make sure that no damages occur during transport, the products are packaged in order to ensure that there is no damage during transit. We can also mark our products on request, making custom markings for our customers.
Quality Assurance
We inspect all fittings and flanges at every stage of the production process at RatnaExports.com, starting with the purchase of raw materials and ending with product delivery. ASTM, ASME, MSS, DIN, EN, and JIS codes and standards are visually examined. For the purpose of verifying material reports, dimensions, and quality conformance of products, officially certified inspection agencies can be called in.
Test Certificates:
An EN 10204/3.1B Manufacturer’s Test Certificate, a Raw Materials Certificate, a 100% radiography test report, and a Third Party Inspection Report.
Industrial Applications Of Class 600 Stainless Steel Forged Flanges
-
- The paper and pulp industry
- The refinery industry
- Power from nuclear sources
- Plants that generate electricity
- Applications in the marine environment
- Power plants that burn fossil fuels
- Construction of ships
- Industry of oil and gas
Other Products
Hot Selling Product
Countries We Export:
Cities We Supply:
London, New-York, Paris, Moscow, Tokyo, Dubai, Singapore, Barcelona, Los-Angeles, Madrid Rome, Chicago, Toronto, San-Francisco, Abu-Dhabi, St-Petersburg, Amsterdam, Berlin Prague, Washington,Istanbul, Las-Vegas, Doha, Seoul, Sydney, Beijing, Miami, Munich, Milan, San-Diego, Bangkok, Vienna, Dublin, Vancouver, Boston, Zurich, Melbourne, Budapest, Houston, Seattle, Montreal, Hong-Kong, Frankfurt, Sao-Paulo, Tel-Aviv, Copenhagen, Calgary, Orlando, Atlanta, Dallas, Hamburg, Osaka, Lisbon, Austin, Phoenix Naples, Oslo, Denver, Stockholm, Riyadh, Delhi, Buenos Aires, San-Jose, Brussels, Portland Philadelphia, Ottawa, Helsinki, Valencia, Brisbane, Warsaw, Minneapolis, Shanghai, Lyon, Adelaide, Edmonton, Marseille, Muscat, Athens, Stuttgart, Rio-De-Janeii, Baltimore, Auckland, Cologne, New-Orlean, Kuwait-City, Kiev, Hanover, Perth, Minsk, Bucharest, Nashville, Dusseldorf, Manchester, Sacramento, Glasgow, Mexico-City, Salt-Lake-Ci, Raleigh, Cracow