Ratna Exports
Ratna Exports
Mumbai, Maharashtra
Send SMS
Send E-mail

Industrial Fasteners

We are mainly looking for export queries.

Get CALLBACK

Inconel Fastener

Inconel Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Range M10 to M100, 3/8" Unc Till 4" Un8
StandardASTM / ASME SB 574
Length Up to 3 Meters
SizeM10 to M100, 3/8" Unc Till 4" Un8

INCONEL (nickel-chromium-iron) alloy 600 (UNSN06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. Inconel is austenitic nickel-chromium superalloys. They are used in extreme environments, often in gas turbines, nuclear reactors and natural gas processing plants.


Bolts shall be made from an alloy which conforms to the following chemical composition requirements-- Nickel (plus Cobalt) 72.0 min. Chromium 14.0-17.0 Iron 6.00-10.00 Carbon 0.15 max. Manganese 1.00 max Sulfur 0.015 max. Silicon 0.50 max. Copper 0.50 max.


HEAT TREATMENTAnnealing: 800~1150℃; Rapid Air or water cooling
HARDNESSNA
YIELD STRENGTH241 Mpa min
TENSILE STRENGTH552 Mpa min
ELONGATION IN 4D30% minimum

APPLICATIONS/ ADVANTAGESINCONEL (nickel-chromium-iron) alloy 601 (UNSN06601) is a nickel-chromium alloy with an addition of aluminum that provides high mechanical properties at elevated temperatures, and superior resistance to oxidation, carburization, and sulfurization. Muffle furnaces, baskets, and other furnace parts, industrial heat treatment furnace parts, special glass melting furnace parts, automobile glow plug parts, automobile exhaust gas sensor covers
MATERIALBolts shall be made from a graded alloy which conforms to the following chemical composition requirements-- Nickel (plus Cobalt) 58.0-63.0. Chromium 21.0-25.0 Iron remainder Carbon 0.10 max. Manganese 1.00 max Sulfur 0.015 max. Silicon 0.50 max. Copper 0.50 max. Aluminum 1.0-1.7.
HEAT TREATMENTSolution treatment at 1100 to 1200℃. Cooling is done with water, though air cooling may be used as well for the thinner material.
HARDNESSNA
YIELD STRENGTH205 Mpa min
TENSILE STRENGTH550 Mpa min
ELONGATION IN 4D30% minimum

Additional Information:
  • Item Code: 600
Yes! I am Interested
Get CALLBACK

Brass Fasteners

Brass Fasteners
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1/2, 3/4, 2/4, inch
MaterialBrass

Keeping in mind the precise demands of our esteemed clients, we manufacture export, retail and supply Brass Fasteners. These fasteners are manufactured at our premises using quality tested metal in compliance with international quality standards. In order to meet the diverse requirements of our clients, the entire array is stringently tested on various defined parameters. Furthermore, the offered fasteners are available at reasonable rates for our valuable clients.


Features:
  • Precisely designed
  • Flawless finish
  • Industrial approved design

Material:

Free Cutting Brass IS 319 Type (I) or BS 249 Type (I) or High Grade
Any Special Brass Material Composition as per customers requirement
Threads:


ISO Metric (MM Threads)
BA, BSW (Inches), UNC, UNF or
Any as per custom design.


Finish And Coating:
Natural, Nickle Plated, Tin Plated brass bolts and brass hex bolts or any coating as per customer specification.

Any kind of special brass bolts and brass hex bolts can be developed and supplied exactly as per customer specifications.
Yes! I am Interested
Get CALLBACK

Copper Fastener

Copper Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Grade ASTM B-187
Material Copper
Size1/2, 3/4, 1, 2/4 inch

Backed by a team of our skilled professionals, we are actively engaged in offering our clients Copper Fastener. Our offered fastener is manufactured by our highly qualified professionals using optimum quality metal and advanced technology, in compliance with the set industry standards. This range is available in various sizes and can be customized as per the specific needs of the clients.
Copper Fasteners Copper rivets and fasteners are often utilized in manufacturing applications due to their strength after cold-heading, corrosion resistance, and antimicrobial properties. We increase the strength of our copper products by the cold forming process, making it an ideal fastener for your requirements.Due to its decorative appeal, copper is an ideal material for manufacturing functional items, and its conductivity makes it perfect for use in electrical applications. Copper rivets are commonly used in clothes, saddles, shoes, bags and more to reinforce the product and because of how aesthetically pleasing copper rivets look. Fasteners grades of copper or fasteners of copper grades include:
  • CDA 102 (ASTM B-187)
  • CDA 110 (ASTM B-187)


Features:

  • Long life
  • Finely finished
  • Corrosion resistance
Yes! I am Interested
Get CALLBACK

Coated Fasteners

Coated Fasteners
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Material SS, MS, Copper
Temperature 300 - 400 degree

We have gained expertise in manufacturing, exporting, retailing and supplying a comprehensive range of Coated Fasteners. Manufactured using high-grade raw materials, all our products are available in various specifications at most competitive prices. Conforming to industrial quality norms and standards, our offered fasteners can also be customized as per the demands and requirements of customers. We also check these fasteners on various parameters to ensure zero defects.

APPLICATIONS/ ADVANTAGESB7 studs are best suited for use in temperatures between 300° - 400° C.
MATERIALBolts shall be made from a grade B7 alloy which conforms to the following chemical composition requirements--
Carbon: 0.37-0.49%; Manganese: 0.65-1.10%; Phosphorus: 0.035% max; Sulfur: 0.040% max; Silicon: 0.15-0.35% ; Chromium: 0.75-1.20% ;Molybdenum: 0.15-0.25%
HEAT TREATMENTImmediately after rolling or forging, the studs are cooled to a temperature below the cooling transformation stage. Parts are then hardened by heating to a temperature of 870°C and oil quenched then it is reheated to a minimum tempering temperature of 593°C and cooled in still air.
HARDNESSRockwell C35 maximum
YIELD STRENGTHStuds 2.5” in diameter and smaller: 105,000 psi. minimum
TENSILE STRENGTHStuds 2.5” in diameter and smaller: 125,000 psi. minimum
ELONGATION IN 4D16% minimum
REDUCTION OF AREA50% minimum
PLATINGStuds are typically provided plain without a secondary finish(PTFE COATED, GALVANIZED, CD ZN PLATED) or as per requirement
APPLICATIONS/ ADVANTAGESGrade-2H nuts are recommended for use with bolts in high-pressure and high-temperature service
MATERIALNuts shall be made from a grade 2H alloy which conforms to the following chemical composition requirements--
Carbon: 0.40% min; Manganese: 1.00% max; Phosphorus: 0.040% max; Sulfur: 0.050% max; Silicon: 0.40% max;
HEAT TREATMENTGrade-2H: These nuts shall be heat treated by quenching in a liquid medium from a temperature above the transformation temperature and tempering at a temperature of at least 850° F.
HARDNESSRockwell C24-C35.
PROOF LOADProof load using threaded mandrels is done its vale varies with size of the nut.
PLATINGNuts are typically provided plain without a secondary finish or as per requirement (PTFE COATED,GALVANIZED,CD ZN PLATED)
Yes! I am Interested
Get CALLBACK

Industrial Fasteners

Industrial Fasteners
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Material SS, MS
Size1/2, 3/4, 1/8, 1 inch

A fastener is a hardware device that mechanically joins or affixes two or more objects together.Fasteners can also be used to piping components such as a valve, pumps, or a maintenance flange; or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc.Fasteners used in these manners are often temporary, in that they may be fastened and unfastened repeatedly.Types High Tensile, Stainless Steel, and Duplex Material FastenersApplications Nuclear Power Plants,Nuclear Waste Management,Cement,Oil and Gas,Mining equipment,Refineries,Steam Turbines,And OEMs of Pumps, Valves, Compressors, and Boilers etc
Yes! I am Interested
Get CALLBACK

Structural Fasteners

Structural Fasteners
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
HardnessRockwell C33 - 38
Tensile Strength 150,000 - 170,000 psi
MaterialCarbon Steel, SS

ASTM A325 BOLTS, Type 1
A heavy hex bolt made of medium carbon steel. The bearing surface shall be flat and washer faced, and the point is chamfered.Commonly used in structural.
Type 1 bolts shall be made from a carbon steel which conforms to the following chemical composition requirements:
Carbon: 0.25-0.58%; Manganese: 0.57% minimum; Phosphorus: 0.048% maximum; Sulfur: 0.058% maximum
HEAT TREATMENTType 1 bolts shall be heat treated by quenching in a liquid medium from above the austenitizing temperature and then tempering by reheating to a temperature of at least 800°F.
HARDNESS1/2" through 1" diameter, inclusive: Rockwell C24 - 35
1-1/8" through 1-1/2" diameter, inclusive: Rockwell C19 - 31
PROOF LOAD1/2" through 1" diameter, inclusive: 85,000 psi.
1-1/8" through 1-1/2" diameter, inclusive: 74,000 psi.
YIELD STRENGTH1/2" through 1" diameter, inclusive: 92,000 psi. minimum
1-1/8" through 1-1/2" diameter, inclusive: 81,000 psi. minimum
TENSILE STRENGTH1/2" through 1" diameter, inclusive: 120,000 psi. minimum
1-1/8" through 1-1/2" diameter, inclusive: 105,000 psi. minimum

ASTM A490 BOLTS, Types 1 & 3

A heavy hex bolt made of alloy steel. The bearing surface shall be flat and washer-faced, and the point is chamfered.
Used in structural steel joints in heavy construction when greater yield and tensile strengths than those of an A325 bolt are required. A Type 3 bolt is approximately twice as resistant to corrosion as a Type 1 bolt.
MATERIALType 1 bolts shall be made from an alloy steel which conforms to the following chemical composition requirements--
Carbon: 0.28-0.50% (for 1-1/2" diameter: 0.33-0.55%); Phosphorus: 0.045% maximum; Sulfur: 0.045% maximum.
Type 3 bolts shall be made from a corrosion resistant steel which conforms to the following chemical composition requirements—
Carbon: 0.19-0.55%; Manganese: 0.37% minimum; Phosphorus: 0.045% maximum; Sulfur: 0.055% maximum; Copper: 0.63% maximum; Chromium: 0.42% minimum; Nickel: 0.17% minimum; Molybdenum: 0.14% minimum.

HEAT TREATMENTType 1 bolts shall be heat treated by quenching in oil from above the transformation temperature.
Type 3 bolts shall be quenched in a suitable liquid from above the transformation temperature. Type 1 and Type 3 bolts shall be tempered by reheating to a temperature of at least 800°F.
HARDNESSRockwell C33 - 38
PROOF LOAD120,000 psi.
YIELD STRENGTH130,000 psi. minimum
TENSILE STRENGTH150,000 - 170,000 psi.
Yes! I am Interested
Get CALLBACK

Monel Fastener

Monel Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Temperature Up to 2000 degree F
Material SS,MS, CS

Monel Fastener
Amco metals can provide a wide variety of Monel fasteners including; Monel nuts, Monel bolts, sockets, washers and more Monel Fasteners. If we do not have your Monel Fasteners in stock (Inch or Metric) we can have these manufactured to your specification.Material Notes:Monel is primarily composed of nickel (up to 67%) and copper, with some iron and other trace elements.Monel alloy 400 is a binary alloy of the same proportions of nickel and copper as is found naturally in the nickel ore from the Sudbury (Ontario) mines.Properties:Compared to steel, Monel is very difficult to machine as it work-hardens very quickly. It needs to be turned and worked at slow speeds and low feed rates. It is resistant to corrosion and acids, and some alloys can withstand a fire of pure oxygen. It is commonly used in applications with highly corrosive conditions. Small additions of aluminum and titanium form an alloy (K-500) with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Monel is typically much more expensive than stainless steel.Monel alloy 400 has a specific gravity of 8.83, an electrical conductivity of approximately 3.4% IACS, and (in the annealed state) a hardness of 65 Rockwell B.Aerospace applicationsMonel metal found bulk uses in aircraft construction, especially in making the frames and skins of experimental rocket planes, such as the North American X-15, to resist the great heat generated by aerodynamic friction during extremely high-speed flight. Monel metal retains its strength at very high temperatures, allowing it to maintain its shape at high atmospheric flight speeds, a trade-off against the increased weight of the parts due to Monel's high density.Marine applicationsMonel's corrosion resistance makes it ideal for marine applications such as piping systems, pump shafts, seawater valves, trolling wire, and strainer baskets. Some alloys are completely non-magnetic and are used for anchor cable aboard minesweepers, housings for magnetic-field measurement equipment. In recreational boating, Monel wire is used to seize shackles for anchor rodes, Monel is used for water and fuel tanks, and for underwater applications. It is also used for propeller shafts and for keel bolts. However, because of the problem of electrolytic action in salt water (also known as Galvanic corrosion), in shipbuilding money must be carefully insulated from other metals such as steel.Different Alloys
Trade NameASTM/AISISteel typeUNS
Monel 400B 127, B 164N04400
Monel 401N04401
Monel 404B 164N04404
Monel K-500B 865N05500
Monel R-405N04405
K-500 Alloy has similar properties to Monel 400 Alloy but has the added feature of Age Hardening to achieve a higher strength and hardness, this is due to the addition of aluminum and titanium. K-500 Alloy's strength is maintained at temperatures as high as 1200 F, yet stays tough and ductile to temperatures down to -423 F. Along with staying non-magnetic down to -210 F. A common specification for this is QQ N 286.
Yes! I am Interested
Get CALLBACK

Stainless Steel Fastener

Stainless Steel Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Tensile strength 30,000 psi. minimum
MaterialSS

We are leading supplier of Stainless Steel Fastener.

Other Details:

APPLICATIONS/ ADVANTAGESB8 CL1 studs are used in a variety of industrial systems, including pumps, valves, and flanges. B8 studs are the most widely supplied to the piping industry.
MATERIALBolts shall be made from a grade B8 (SS 304) alloy which conforms to the following chemical composition requirements--
Carbon: 0.08% max; Manganese: 2.00% max; Phosphorus: 0.045% max; Sulfur: 0.030% max; Silicon: 1.00% max ; Chromium: 18.0-20.0% ;Nickel: 8.0-11.0%
HEAT TREATMENTImmediately after rolling or forging, the studs are cooled to a temperature below the cooling transformation stage. Parts are then solution annealed by heating to a temperature of 1060°C and water quenching.(Carbide Solution Treatment)
HARDNESSRockwell B96 maximum.
YIELD STRENGTHStuds all sizes 30,000 psi. minimum
TENSILE STRENGTHStuds all sizes 75,000 psi. minimum
ELONGATION IN 4D30% minimum
REDUCTION OF AREA50% minimum
PLATINGAcid cleaning and passivation is done followed by buffing/cleaning

APPLICATIONS/ ADVANTAGESB8M CL1 studs are used in a variety of industrial systems, including pumps, valves, and flanges. B8M studs are the most widely supplied to the piping industry.
MATERIALBolts shall be made from a grade B8M (SS 316) alloy which conforms to the following chemical composition requirements--Carbon: 0.08% max; Manganese: 2.00% max; Phosphorus: 0.045% max; Sulfur: 0.030% max; Silicon: 1.00% max; Chromium: 16.0-18.0%; Nickel: 10.0-14.0%; Molybdenum: 2.0-3.0%.
HEAT TREATMENTImmediately after rolling or forging, the studs are cooled to a temperature below the cooling transformation stage. Parts are then solution annealed by heating to a temperature of 1060°C and water quenching.(Carbide Solution Treatment)
HARDNESSRockwell B96 maximum.
YIELD STRENGTHStuds all sizes 30,000 psi. minimum
TENSILE STRENGTHStuds all sizes 75,000 psi. minimum
ELONGATION IN 4D30% minimum
REDUCTION OF AREA50% minimum
PLATINGAcid cleaning and passivation is done followed by buffing/cleaning

Additional Information:
  • Item Code: 316L
Yes! I am Interested
Get CALLBACK

Inconel Fasteners

Inconel Fasteners
 
Get Best Quote
Approx. Rs 1,500 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity50 Kilogram
Material High Nickel
Size1/2'' to 2''

We, at Ratna Exports, develop and nourish quality and variation and lead them in our products through constant trials and quality control. We service our buyers a premium quality product outline, assisting them to choose a fit one for their business. We are anISO 9001: 2015 certified company, devoted to establishing and nursing customer oriented engagements.We are a manufacturer, trader, stockist, supplier, and exporter of Inconel Fasteners that have a huge strength due to the Chromium-Nickel bond besides having excellent fatigue strength. Our   Inconel Fasteners Bolts are hardware devices that mechanically fastened or clamped, either permanently or temporarily. They are quick to fit and remove too.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Get CALLBACK

Bolt Fasteners

Bolt Fasteners
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

APPLICATIONS/ ADVANTAGESB7 Bolts are best suited for use in temperatures between 300° - 400° C.
MATERIALBolts shall be made from a grade B7 alloy which conforms to the following chemical composition requirements--
Carbon: 0.37-0.49%; Manganese: 0.65-1.10%; Phosphorus: 0.035% max; Sulfur: 0.040% max; Silicon: 0.15-0.35% ; Chromium: 0.75-1.20% ;Molybdenum: 0.15-0.25%
HEAT TREATMENTImmediately after rolling or forging, the studs are cooled to a temperature below the cooling transformation stage. Parts are then hardened by heating to a temperature of 870°C and oil quenched then it is reheated to a minimum tempering temperature of 593°C and cooled in still air.
HARDNESSRockwell C35 maximum
YIELD STRENGTHStuds 2.5” in diameter and smaller: 105,000 psi. minimum
TENSILE STRENGTHStuds 2.5” in diameter and smaller: 125,000 psi. minimum
ELONGATION IN 4D16% minimum
REDUCTION OF AREA50% minimum
PLATINGStuds are typically provided plain without a secondary finish or as per requirement
APPLICATIONS/ ADVANTAGESB16 is one of the most common fasteners specs for heavy industry like petroleum and chemical industries and in High temperature pressure flange joints
MATERIALBolts shall be made from a grade B16 alloy which conforms to the following chemical composition requirements--Carbon: 0.36-0.47%; Manganese: 0.45-0.70%; Phosphorus: 0.035% max; Sulfur: 0.040% max; Silicon: 0.15-0.35%; Chromium: 0.8-1.15%; Molybdenum: 0.50-0.65%; Vanadium: 0.25-0.35%; Aluminum 0.015% max
HEAT TREATMENTImmediately after rolling or forging, the studs are cooled to a temperature below the cooling transformation stage. Parts are then hardened by heating to a temperature of 940°C and oil quenched then it is reheated to a minimum tempering temperature of 650°C and cooled in still air.
HARDNESSRockwell C35 maximum.
YIELD STRENGTHStuds 2.5” in diameter and smaller: 105,000 psi. minimum
TENSILE STRENGTHStuds 2.5” in diameter and smaller: 125,000 psi. minimum
ELONGATION IN 4D18% minimum
REDUCTION OF AREA50% minimum
PLATINGStuds are typically provided plain without a secondary finish or as per requirement
Yes! I am Interested
Get CALLBACK

Hastalloy Fastener

Hastalloy Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Specifications:

  • Range: M10 to M100, 3/8" Unc Till 4" Un8 Length Upto 3 Meters
  • Standard: ASTM / ASME SB 574
  • Grades: Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000
Yes! I am Interested
Get CALLBACK

Carbon Steel Fastener

Carbon Steel Fastener
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

APPLICATIONS/ ADVANTAGESUsed in high tensile bolting applications, metric 12.9 bolts exhibit high tensile strength and good wear resistance.
MATERIALGrade 12.9 bolts

Carbon: 0.28-0.50%; Phosphorus: 0.035% max; Sulfur: 0.035% max; Boron: 0.003%max.
HEAT TREATMENTImmediately after rolling or forging the studs are quenched and tempered at 380°C and air cooled.
HARDNESSRockwell C39-C44.
YIELD STRENGTHStuds all sizes 1100N/mm2 minimum
TENSILE STRENGTHStuds all sizes 1220N/mm2 minimum
APPLICATIONS/ ADVANTAGESUsed in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.
MATERIALGrade 10.9 bolts
Carbon: 0.15-0.35%; Phosphorus: 0.035% max; Sulfur: 0.035% max; Boron: 0.003%max.
HEAT TREATMENTImmediately after rolling or forging the studs are quenched and tempered at 340°C and air cooled.
HARDNESSRockwell C32-C39.
YIELD STRENGTHStuds all sizes 940N/mm2 minimum
TENSILE STRENGTHStuds all sizes 1040N/mm2 minimum
ELONGATION IN 4D9% minimum
REDUCTION OF AREA48% minimum
APPLICATIONS/ ADVANTAGESUsed in railroad equipment, motors, engines and processing equipment, grade 8.8 bolts exhibit good tensile strength and perform well in most environments. They do not perform well in environments that experience temperature extremes.
MATERIALGrade 8.8 Bolts
Carbon: 0.25-0.55%; Phosphorus: 0.035% max; Sulfur: 0.035% max; Boron: 0.003%max.
HEAT TREATMENTImmediately after rolling or forging the studs are quenched and tempered at 450°C and air cooled.
HARDNESSRockwell C23-C34.
YIELD STRENGTHStuds 16mm dia and above 660N/mm2 minimum
TENSILE STRENGTHStuds 16mm dia and above 830N/mm2 minimum
ELONGATION IN 4D12% minimum
REDUCTION OF AREA52% minimum

Additional Information:
  • Item Code: B7
Yes! I am Interested
Explore More Products
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
X
Looking for “Industrial Fasteners”?
Find Us Hardik Sheth (Manager) 77, Prabhu Shri Ram Mandir Marg, Grant Road, Mumbai - 400004, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: