Ratna Exports
Grant Road (E), Mumbai, Maharashtra
GST No. 27ALWPS4962J1Z2
Call 0804876293487% Response Rate
Send E-mail
We are mainly looking for export queries.
| Elbow Bend Angle | 90 Degree, 30 Degree, 45 Degree |
| Size | 1/4 inch, 3/4 inch, 1 inch |
| Connection | Welded |
| Material | SS |
| Type | Seamless & welded |
| Elbow Bend Angle | 45 Degree, 90 Degree |
| Connection | Welded |
| Size | 1/4 inch, 3/4 inch, 1 inch |
| Application | Chemical Fertilizer Pipe, Structure Pipe, Gas Pipe |
| MOC | SS,CS, Alloy Steel |
| Type | Seamless & welded |
| Size | 1/4 inch, 3/4 inch, 1 inch |
| Connection | Welded, Male |
| Elbow Bend Angle | 30 Degree, 90 Degree, 45 Degree |
| Application | Structure Pipe, Gas Pipe, Chemical Fertilizer Pipe |
| Material | SS |
| Material Grade | 304L, 304H |
| Tolerance | +/- .02 on all dimensions |
| Material | Brass |
| Temperature Range | -65 to +250 degree F |
| Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
Boiler Fittings
Typical Application- Instrumentation, hydraulic and pneumatic systems.
Pressure- Working pressure up to 2000 PSI with a 4:1 safety factor depending on tube size.
When using plastic tubing, use the working pressure for the type used.
Vibration- Fair resistance - use long nut when greater vibration resistance is needed.
Temperature Range- -65oF to +250oF (-53oC to +121oC) range at maximum operating pressures.
(Refer to tubing temperature range.)
Material- SS - 3044/304L/316/316L/904L
HIGH NICKEL: INCONEL 625/600/825/800
NON-FERROUS: COPPER /COPPER NICKEL (90:10)
BRASS
CA360 Brass for bar stock fittings.
CA377 Brass for forged fittings.
Used With- Aluminum, copper, brass and steel tubing.
Tolerance: +/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical.
Conformance- Meets specifications and standards of ASA, ASME, and SAE.
Assembly Instructions
Cut tubing to the desired length.
Slide nut and then sleeve on the tube. Threaded end “A” of nut must face toward fitting.
Insert tubing into the fitting body. Be sure tubing is bottomed on the fitting shoulder.
Lubricate threads and assemble nut into fitting body.
Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below.
Other Details:
| Elbow Bend Angle | 90 Degree, 45 Degree, 30 Degree |
| Connection | Female, Male |
| Size | 1/4 inch, 1 inch, 2 inch, 3/4 inch |
| Material | CS |
| Size | 1 inch, 2 inch, 1/2 inch, 3/4 inch |
| Application | Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe |
| Material | CS |
| Standard | ASTM A182 |
| Type | Seamless & Welded |
| Available Size | 1 / 8" NB to 48" NB |
| Material | SS, CS |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Chemical Fertilizer Pipe, Structure Pipe |
| Material | SS |
| Size | 2 inch, 1/2 inch, 3/4 inch, 1 inch |
| Type | Seamless & Welded |
| Material | SS, MS |
| Size | 1/2, 3/4, 1/4, inch |
| Material | SS, MS |
| Type | Socketweld & Threaded |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Structure Pipe |
| Condition | New |
| Material | Brass |
| Standard | ASTM A182 |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Chemical Fertilizer Pipe, Gas Pipe, Structure Pipe |
| Type | Seamless & welded |
| Material | SS, CS |
| Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
| Application | Chemical Fertilizer Pipe, Structure Pipe, Pneumatic Connections, Gas Pipe |
| Material | SS, MS |
| Type | Seamless & Welded |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe |
| Material | SS, MS |
| Standard | ASTM A182 |
| Size | 1 inch, 1/2 inch, 3/4 inch |
| Application | Structure Pipe, Chemical Fertilizer Pipe, Gas Pipe |
| MOC | SS, CS |
| Elbow Angle | 90, 45 |
It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low-temperature applications.
Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc.
Nickel has high metallurgical stability making it suitable for hard-metal industry.
It also acts as a catalyst in various chemical processes.
Nickel alloys tubing products are made available in seamless and welded tubes and pipes
Important characteristics include corrosion & oxidation resistance, ductility, brilliant polish, excellent mechanical strength, high creep resistance, high-temperature resistance.| Size | 3/4 inch, 1 inch, 1/2 inch |
| Application | Gas Pipe, Chemical Fertilizer Pipe, Structure Pipe |
| Material | CS |
| Type | Seamless & welded |
Carbon Steel Pipes fitting
Application for engineering purpose, ERW pipes for water, gas & sewerage, carbon steel tubes for idlers of belt conveyors, water wells and lancing pipes for various automotive & industrial applications
Carbon Steel is used in the most critical engineering applications and also in certain applications in the automotive sector.
In addition, some of the value-added Carbon Steel products include steel for LPG cylinders, API grade, corrosion resistant steel, critical structural application steel, boiler quality, auto grades, precision tubes and medium/high carbon grades, among others.
Other details:
| Application | Automobile Industry |
| Size | 1/2, 1/4, 1/8, 3/4, 1 inch |
| Material | CS, SS |
| Connection | Male,female |
Application for engineering purpose, ERW pipes for water, gas & sewerage, carbon steel tubes for idlers of belt conveyors, water wells and lancing pipes for various automotive & industrial applications
Carbon Steel is used in the most critical engineering applications and also in certain applications in the automotive sector.
In addition, some of the value-added Carbon Steel products include steel for LPG cylinders, API grade, corrosion resistant steel, critical structural application steel, boiler quality, auto grades, precision tubes and medium/high carbon grades, among others.
| Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
| Application | Structure Pipe, Gas Pipe, Pneumatic Connections |
| Material | Alloy Steel |
| Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
| Material | SS, MS |
| Connection Type | Male, Female |
We are leading supplier of Forged Threaded Fittings.
Non-toxic, Environment-friendly and cost-effective as no welding is involved.
Chances of leakage are comparatively higher, generally not used where leaks cannot be tolerated.
Reference standard ASME B 16.11
Size frequently limited to NPS ≤ 4” in following classes
Class Designations | Pipe used for rating Basis | |
Schedule No. | wall Designation | |
2000# | 80 | XS |
3000# | 160 | --- |
6000# | --- | XXS |
· Used in services where regular maintenance is required.
· All fittings are threaded both internal(Female) and external(Male) with American National Standard Pipe Threads ASME B1.20.1 (NPT) or British Standard Pipe Threads (BSP)
| Size | 2 inch, 1/2 inch, 3/4 inch, 1 inch |
| Standard | ASTM A182 |
| Material | Steel |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Material | SS |
| Standard | ASTM A182 |
| Size | 1/2 inch, 3/4 inch, 1 inch |
| Application | Pneumatic Connections, Structure Pipe |
| Material | SS, MS |
Butt Weld Pipe Fittings
Fittings generally produce change in geometry and its application include
Use of these fittings are generally not restricted in most of the piping systems, Difficult for small sizes, especially for thin wall
| Size | 1/2, 3/4, 1/4, inch |
| Material | SS, MS |
| Standard | ASTM A182 |
| Material | SS, MS |
| Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
| Application | Structure Pipe,Gas Pipe,Chemical Fertilizer Pipe,Pneumatic Connections |