Ratna Exports
Ratna Exports
Mumbai, Maharashtra
Send SMS
Send E-mail

Pipe Fittings

We are mainly looking for export queries.

Get CALLBACK

Duplex Tee

Duplex Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1/ 8
ApplicationDrinking Water Pipe, Chemical Handling Pipe, Structure Pipe
Form Reducing Tee, Unequal Tee, Equal Tee
Class3000 LBS, 6000 LBS, 9000 LBS
TypeSocket Weld (S / W) & SCREWED (SCRD)-NPT, BSP, BSPT

Duplex Tee

Duplex Pipe Fittings are the widely chosen fittings, used in critical conditions of industries. Widely demanded in the industries of oil & gas, petrochemical, and many others, these fittings are designed with the assurance of dimensional accuracy, resistance against corrosion and high tolerance capacity. Designed in the options of threaded and socket weld end connections, the pipe fittings have either buttweld, seamless or welded construction. These have the ability to bear a wide range of pressure level with excellent inertness to toxic chemicals. Best suited for highly critical applications where leakage can be hazardous, the pipe fittings are used in boilers, desalination plants and brewing tanks. There are minimum burrs at the edge of the fittings with excellent accuracy in dimensions even in high-temperature range. Due to their high yield strength, these are widely demanded in the petrochemical industry, nuclear industry, paper & pulp industry and defense sector. Fittings generally produce the change in geometry and its application include:
  • Change in direction of piping
  • Alter piping dimensions
  • Terminate piping line
  • Brings pipes together (make the branch from main pipe run)
  • Reference standard ASME B 16.9
  • Use of these fittings are generally not restricted in most of the piping systems
  • Difficult for small sizes, especially for thin wall
  • Straight: Braches to the same pipe size as the run
  • Reducing: Branches to smaller pipe size than the run
  • Bullhead: Branches to bigger pipe size than the run, seldom used, made for the special purpose only.

Duplex steel grades : ASTM A 815 UNS S31803, S32205.Details:
  • Reducing tee, 3 / 4" x 3 / 4" x 1 / 2"
  • Reducing tee, 1" x 1" x 1 / 2"
  • Reducing tee, 1-1 / 2" x 1-1 / 2" x 3 / 4"
  • Reducing tee, 1 / 2" x 1 / 2" x 1 / 8"
  • Reducing tee, 2" x 2" x 1"
  • Reducing tee, 2" x 2" x 1-1 / 2"
  • Reducing tee, 2" x 2" x 3 / 4"
  • Reducing tee, 3" x 3" x 2"
Yes! I am Interested
Get CALLBACK

CS Tee

CS Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 8
ApplicationStructure Pipe, Gas Pipe
MaterialCS
FormReducing Tee, Unequal Tee, Equal Tee

 Fittings generally produce a change in geometry and its application include:
  • Change in direction of piping
  • Alter piping dimensions
  • Terminate piping line
  • Brings pipes together (make a branch from main pipe run).
  • Reference standard ASME B 16.9
  • Use of these fittings are generally not restricted in most of the piping systems

 
GRADEC%Mn%P%S%Si%Cu%Ni%Cr%Mo%V%
ASTM A 105-0.6--0.1-----
0.351.050.0350.040.350.40.40.30.120.08
ASTM A 234 WPB-0.29--0.1-----
0.31.060.050.058-0.40.40.40.150.08
ASTM A 234 WPC-0.29--0.1-----
0.31.060.050.058-0.40.40.40.150.08
ASTM A 234 WP1-0.3--0.1NANANA0.44NA
0.280.90.0450.0450.50.65
ASTM A 234 WP120.050.3---NANA0.80.44NA
0.20.80.0450.0450.61.250.65
ASTM A 234 WP110.050.3--0.5NANA10.44NA
0.150.60.030.0311.50.65
ASTM A 234 WP220.050.3---NANA1.90.87NA
0.150.60.040.040.52.61.13


Other details:
  • Class: 3000 LBS, 6000 LBS, 9000 LBS
  • Type: Socket Weld (S / W) & SCREWED (SCRD)–NPT, BSP, BSPT

Details:

  • Reducing tee, 3 / 4" x 3 / 4" x 1 / 2"
  • Reducing tee, 1" x 1" x 1 / 2"
  • Reducing tee, 1-1 / 2" x 1-1 / 2" x 3 / 4"
  • Reducing tee, 1 / 2" x 1 / 2" x 1 / 8"
  • Reducing tee, 2" x 2" x 1"
  • Reducing tee, 2" x 2" x 1-1 / 2"
  • Reducing tee, 2" x 2" x 3 / 4"
  • Reducing tee, 3" x 3" x 2"
Yes! I am Interested
Get CALLBACK

Super Duplex Tee

Super Duplex Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1/2 NB to 36, ANSI B 16.9, MSS-SP-43
MaterialStainless Steel
Schedule10S/40S/80S/160S/XXS
Duplex SteelASTM A815-UNS S31803, S32750,S32760,S32205

Primarily used for plumbing purposes, the offered product is manufactured using quality approved raw material and innovative technology under the direction of our adroit professionals. This product is examined on various benchmarks to assure its flawlessness. Furthermore, we provide this Super Duplex S32750 Tee in numerous dimensions as per clients' specific requirements at pocket-friendly prices.
Features:
  • Sturdy construction leads to withstand high pressure
  • High tensile strength and rigid structure
  • Anti-corrosive property that enhances its durability
  • Polished with quality approved chemical that assures its rust proof nature
  • Sturdy design with accurate dimensions
  • Abrasion resistance to superior dimensional stability
 
Yes! I am Interested
Get CALLBACK

Hastelloy Tee

Hastelloy Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 8" nb to 48" nb
Class3000 LBS, 6000 LBS, 9000 LBS
TypeSocket Weld (S / W) & SCREWED (SCRD)-NPT, BSP, BSPT
FormReducing Tee, Unequal Tee, Equal Tee

Hastelloy Tee· It is a hard and ductile metal of silver-white color.· It has high corrosion resistance suitable for both high and low-temperature applications.· Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc.· Nickel has high metallurgical stability making it suitable for hard-metal industry.· It also acts as a catalyst for various chemical processes.· Important characteristics include corrosion & oxidation resistance, ductility, brilliant polish, excellent mechanical strength, high creep resistance, high-temperature resistance.
GRADEC%Mn%P%S%Si%Ni%Cr%Mo%Fe%Co%W%V%
HASTELLOY C22-----BAL2012.52-2.5-
0.0150.50.020.020.0822.514.562.53.50.35
HASTEALLOY C276-----BAL14.5154-3-
0.0110.040.030.0816.51772.54.50.35


Details:
  • Reducing tee, 3 / 4" x 3 / 4" x 1 / 2"
  • Reducing tee, 1" x 1" x 1/2"
  • Reducing tee, 1-1 / 2" x 1-1 / 2" x 3 / 4"
  • Reducing tee, 1 / 2" x 1 / 2" x 1 / 8"
  • Reducing tee, 2" x 2" x 1"
  • Reducing tee, 2" x 2" x 1-1 / 2"
  • Reducing tee, 2" x 2" x 3 / 4"
  • Reducing tee, 3" x 3" x 2"
Yes! I am Interested
Get CALLBACK

CS Cross

CS Cross
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 inch
ColorBlack
ConditionNew
MaterialCarbon Steel

Cross Fittings We offer a wide-ranging Cross Fitting to our clients across the country. Our range is designed and developed in cycle with the latest technological advancements in the market. 01. Cross Fittings Designed as per international standards, Cross Fittings are manufactured by us to provide zero leaks with full flow connection in hydraulic systems. These are available in fractional sizes range from 1/8 inches Tube OD to 1-inch tube OD and metric sizes ranging from 6mm to 25mm. Male Pipe Thread sizes range from 1/8 inches NPT to 1-inch NPT.
· Application for engineering purpose, for water, gas & sewerage, carbon steel tubes for idlers of belt conveyors, water wells and lancing pipes for various automotive & industrial applications· In addition, some of the value-added Carbon Steel products include steel for LPG cylinders, API grade, corrosion resistant steel, critical structural application steel, boiler quality, auto grades, precision tubes and medium/high carbon grades, among others.
GRADEC%Mn%P%S%Si%Cu%Ni%Cr%Mo%V%
ASTM A 53-0.95--NA-----
0.251.20.050.0450.40.40.40.150.08
ASTM A 106 A-0.27--0.1-----
0.250.930.0350.035-0.40.40.40.150.08
ASTM A 106 GRADE C-0.29--0.1-----
0.351.060.0350.035-0.40.40.40.150.08
ASTM A 333 GRADE 6-0.29--0.1NANA
0.31.060.0250.025-
ASTM A672 C60-0.6--0.15NANA
0.210.90.0350.0350.4
ASTM A672 C65-0.85--0.15NANA
0.241.20.0350.0350.4
ASTM A672 C70-0.85--0.15NANA
0.271.20.0350.0350.4
API 5L PSL1 X52----NANA
0.281.40.030.03
Yes! I am Interested
Get CALLBACK

Hastelloy Cap

Hastelloy Cap
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
MaterialSS, CS, MS
Size 1 / 2 nb to 4 inch nb
Typesocket weld & screwed
GradeUNS N10276, N06022, N10665, N06455

Hastelloy CapClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high-density steel and brass to provide the leakage-proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients. Hastelloy Tee· It is a hard and ductile metal of silver-white color.· It has high corrosion resistance suitable for both high and low-temperature applications.· Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc.· Nickel has high metallurgical stability making it suitable for hard-metal industry.· It also acts as a catalyst for various chemical processes.· Important characteristics include corrosion & oxidation resistance, ductility, brilliant polish, excellent machine strength, high creep resistance, high-temperature resistance. 
GRADEC%Mn%P%S%Si%Ni%Cr%Mo%Fe%Co%W%V%
HASTELLOY
C22
-----BAL2012.52-2.5-
0.0150.50.020.020.0822.514.562.53.50.35
HASTEALLOY C276-----BAL14.5154-3-
0.0110.040.030.0816.51772.54.50.35
Yes! I am Interested
Get CALLBACK

Pipe Bends

Pipe Bends
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
MaterialStainless Steel, Carbon Steel
range 2"NB to 18"NB IN
TypeSeamless/ Welded/ Fabricated
Grade L, H, 316, Ti, 309, ASTM A 403 WP TP304

The production of high-quality bends depends on the manufacturing process of the steel pipe that is transformed into the bend. During the hot induction bending process, thinning inevitably occurs on the extrados of the bend.Obtaining the most suitable chemical composition is also important as this enables the recovery of the pipe’s material properties following the hot induction bending process. Depending on pipe dimensions, grades and final bending conditions, alloying elements can be added to the steel in order to guarantee the required hardness and mechanical properties and to ensure that the bend’s chemistry matches as much as possible the line pipe’s chemistry.Heat treatment is carried out on each bend in order to achieve the required mechanical properties after bending. For critical applications, such as high-strength steel, heavy wall, sour service or low-temperature,  we also perform all  quenching and tempering after bending, as a preferred process.Machining of the bend ends guarantees optimum tolerances of inside diameters, as we ensure the bend has at least the minimum working tolerances of the mother pipe.
SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75Form: Long Radius Bend, Piggable Bend, Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized BendOffer: Minimum Wall Thinning rate & Ovality, No WrinklesMaterials:
Stainless Steel 3D Bend
ASTM A 403 WP TP304,H,L,316,H,L,Ti,309 310, 317L, 321, 347, 904L Duplex Stainless Steel Bend
ASTM A 815 UNS S31803, S32760, S31500 Alloy Steel Bend
ASTM A 234 WP-P5, P9, P11, P12, P21, P22 & P91Carbon Steel Bend
ASTM A 234 WPB,Low-Temperature Carbon Steel Bend
ASTM A 234 WPBNickel Alloy Bend:
Standard: ASTM / ASME SB 336.
UNS 10276 (HASTELLOY C 276 Cap)
UNS 2200 (NICKEL 200 Cap ),
UNS 2201 (NICKEL 201 Cap ),
UNS 4400 (MONEL 400 Cap ),
UNS 8020 (ALLOY 20 Cap)
UNS 8825 INCONEL (825 Cap ),
UNS 6600 (INCONEL 600 Cap ),
UNS 6601 (INCONEL 601 Cap ),
UNS 6625 (INCONEL 625 Cap),VALUE ADDED SERVICES
Hot Dip Galvanizing
Epoxy Coating
TEST CERTIFICATE
Mill Test Certificate as per EN 10204 / 3.1B
Yes! I am Interested
Get CALLBACK

SS Cross

SS Cross
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 4" NB to 24" NB
TypeSeamless & Welded
Wall ThicknessSCh. 5s To 1 Sch

SS CrossWe offer a wide-ranging Cross Fitting to our clients across country. These products are manufactured by using the premium quality heavy strength Steel, Brass and other raw material. Pressure testing is conducted at our manufacturing facility for effective and long-lasting performance. Our range is designed and developed in cycle with the latest technological advancements in the market. 01. Cross Fittings Designed as per international standards, Cross Fittings are manufactured by us to provide zero leaks with full flow connection in hydraulic systems. These are available in fractional sizes range from 1/8 inches Tube OD to 1 inch tube OD and metric sizes range from 6mm to 25mm. Male Pipe Thread sizes range from 1/8 inches NPT to 1 inch NPT. The products are also customized as per specifications also.· Straight: Braches to the same pipe size as the run.· Reducing: Branches to smaller pipe size than the run (rarely used).
Features:
Application in high demanding industries and sectors, particularly high temperature and corrosive services.Stainless steel are reliable long lasting and at par with international quality and safety normsStainless Steel ERW, EFW cross fittings· Applications include attractive appearance, corrosion resistance, low maintenance and strength of stainless steel.· Stainless steel is more expensive than standard grades of steel but it has greater resistance to corrosion, needs low maintenance and has no need for painting or other protective coatings.· These factors mean stainless steel can be more economically viable once service life and life-cycle costs are considered.
  • Robust structure
  • Fine Finish
  • Precise design


Yes! I am Interested
Get CALLBACK

SS Tee

SS Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 2"NB TO 4"NB IN
FormReducing Tee, Unequal Tee, Equal Tee
Material SS, MS

 Fittings are manufactured from materials consisting of forgings, bar, SMLS tubular products which shall conform to the requirement for WP SMLS manufacturing materials of ASTM Fitting specifications A 234, A 403, A 420, A 815, B 366 or ASTM forging specifications A 105, A 182, A 350, B 283, B 462, B 564Socket weldingReference standard ASME B 16.11Size frequently limited to NPS ≤ 4” in following classes
Class DesignationsPipe used for rating Basis
Schedule No.wall Designation
3000#80XS
6000#160---
9000#---XXS
· Not used in severe cyclic conditions and in services where corrosion is accelerated in the crevices.· No weld metal can enter Bore· Easier alignment of smaller lines than Butt weld fittings· Tacking procedure is not necessary, therefore reducing welding time.· No chance of leakage2. Threaded· Non-toxic, Environment-friendly and cost-effective as no welding is involved.· Chances of leakage are comparatively higher, generally not used where leaks cannot be tolerated.· Size frequently limited to NPS ≤ 4” in following classes
Class DesignationsPipe used for rating Basis
Schedule No.wall Designation
2000#80XS
3000#160---
6000#---XXS
 Used in services where regular maintenance is required.All fittings are threaded both internal(Female) and external(Male) with American National Standard Pipe Threads ASME B1.20.1 (NPT) or British Standard Pipe Threads (BSP)

Additional information:
  • Class: 3000 LBS, 6000 LBS, 9000 LBS
  • Type: Socket Weld (S / W) & Screwed (SCRD)–NPT, BSP, BSPT
  • Form: Reducing Tee, Unequal Tee, Equal Tee
Yes! I am Interested
Get CALLBACK

Inconel Tee

Inconel Tee
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 8" nb to 48" NB
FormReducing Tee, Unequal Tee, Equal Tee
Material Nickel

Inconel Tee
It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low-temperature applications. Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc.Nickel has high metallurgical stability making it suitable for hard-metal industry. It also acts as a catalyst in various chemical processes.Important characteristics include corrosion & oxidation resistance, ductility, brilliant polish, excellent mechanical strength, high creep resistance, high-temperature resistance. 
GRADEC%Mn%P%S%Si%Cu%Ni%Cr%Mo%Ti%Cb%Al%Fe%
INCONEL 600--NA---7214NANANANA6
0.1510.0150.50.5-1710
INCONEL 625-----NA58208-3.15--
0.10.50.0150.0150.5-23100.44.150.45
INCOLOY 800-NANANANANA3019NA0.15NA0.1539.5
0.135230.60.6-
INCOLOY 825--NA--1.53819.52.50.6NA-22
0.0510.030.534623.53.51.20.2-
INCOLOY 925--NA--1.54219.52.51.9-0.122
0.0310.030.534622.53.52.40.50.5-

Other details:
  • Class: 3000 LBS, 6000 LBS, 9000 LBS
  • Type: Socket Weld (S / W) & SCREWED (SCRD)–NPT, BSP, BSPT

Details:

  • Reducing tee, 3 / 4" x 3 / 4" x 1 / 2"
  • Reducing tee, 1" x 1" x 1 / 2"
  • Reducing tee, 1-1 / 2" x 1-1 / 2" x 3 / 4"
  • Reducing tee, 1 / 2" x 1 / 2" x 1 / 8"
  • Reducing tee, 2" x 2" x 1"
  • Reducing tee, 2" x 2" x 1-1 / 2"
  • Reducing tee, 2" x 2" x 3 / 4"
  • Reducing tee, 3" x 3" x 2"
Yes! I am Interested
Get CALLBACK

Eccentric Reducer

Eccentric Reducer
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 8 to 4 inch
GradesASTM A182 F304, 304L, 304H, 316, 316L, 317, 317L, 321, 310, 347, 904L
MOCSS, MS

A reducer is a component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter).The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer:concentric and eccentric reducers.A reducer can be used either as a nozzle or as diffuser depending on the mach number of the flow.A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system or to adapt to existing piping of a different size. Reducers are usually concentric but eccentric reducers are used when required to maintain the same top-or bottom-of-pipe level.These fittings are manufactured in inch and metric size.An eccentric reducer is a fitting used in piping systems between two pipes of different diameters. They are used where the diameter of the pipe on the upstream side of the fitting (i.e. where the flow is coming from) is larger than the downstream side. Unlike a concentric reducer, which resembles a cone, eccentric reducers have an edge that is parallel to the connecting pipe. This parallel edge results in the two pipes having offset center lines. The same fitting can be used in reverse as an eccentric increaser/expander.Horizontal liquid reducers are always eccentric, top flat (unless on control set, same as PV, TV, HV, LV) or (pipe rack), which prevents the build-up of air bubbles in the system. Eccentric reducers are used at the suction side of pumps to ensure air does not accumulate in the pipe. The gradual accumulation of air in a concentric reducer would result in a large bubble that could eventually cause the pump to stall or cause cavitation when drawn into the pump.The word eccentric in regards to piping is commonly pronounced "e-sentrik" (spelled "ecentric"). This has become an industry standard and is widely taught in schools.Horizontal gas reducers are always eccentric, bottom flat, which allows condensed water or oil to drain at low points.Reducers in vertical lines are generally concentric unless the layout dictates otherwise.
Yes! I am Interested
Get CALLBACK

Concentric Reducer

Concentric Reducer
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Material SS, CS
Grade ASTM A403 WP 304, 304L, 304H, 316, 316L
Size 1/2, 3/4, 1, 2 inch

Concentric Reducer

A reducer is a component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter).The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer: concentric and eccentric reducers.A reducer can be used either as a nozzle or as diffuser depending on the mach number of the flow.A reducer allows for a change in pipe size to meet hydraulic flow requirements of the system or to adapt to existing piping of a different size. Reducers are usually concentric but eccentric reducers are used when required to maintain the same top-or bottom-of-pipe level.These fittings are manufactured in inch and metric size.
Other details:

  • Stainless Steel: ASTM A403 WP 304, 304L, 304H, 316, 316L, 317, 317L, 321, 310, 347, 904L
  • Carbon Steel: ASTM A234 WPB, A420 WPL3, A420 WPL6, MSS-SP-75 WPHY 42, 46, 52, 56, 60, 65, 70
  • Alloy Steel: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91
  • Others: Monel, nickel, inconel, hastelloy, copper, brass, bronze, titanium, tantalum, bismuth, aluminum, high speed steel, zinc and lead
Yes! I am Interested
Get CALLBACK

Titanium Cap

Titanium Cap
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Material Titanium
Size 1/2, 3/4, 1 inch

Titanium CapClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high-density steel and brass to provide the leakage-proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients.
Our Titanium inventories and supplies numerous standard and reducing Cap Closures options. These Closures are available in both Titanium Grades 2 & 7. These Cap Closures are offered in many different schedules and sizes.
Yes! I am Interested
Get CALLBACK

Inconel Cap

Inconel Cap
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
Size1 / 2 NB to 4 inch NB
TypeSocket Weld & Screwed
GradeUNS N06600, N06601, N06625, N08800, N08810, N08825

Inconel CapClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high-density steel to provide the leakage-proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients.

Yes! I am Interested
Get CALLBACK

SS Cap

SS Cap
 
Get Best Quote
Approx. Rs 200 / KilogramGet Latest Price

Product Details:
MaterialSS
Grade ASTM A403 WP 304, 304L, 304H, 316, 316L, 317, 317L, 321, 310, 347, 904L

SS Cap
Closure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high-density steel to provide the leakage-proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients.
Yes! I am Interested
Get CALLBACK

Super Duplex Cap

Super Duplex Cap
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
MaterialSS, CS
StandardGB / ASTM / ASME / DIN / JIS, ASTM / ASME SA 815 UNS S32750, S32760
Size 1/2, 1, 3/4, 2 inch

Super Duplex CapClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high density steel and brass to provide the leakage proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients.
Yes! I am Interested
Get CALLBACK

Duplex Cap Closures

Duplex Cap Closures
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
MaterialSS
Standard ASTM / ASME SA 815 UNS S31803, S32205, S32550, S32750, S32760, GB / ASTM / ASME / DIN / JIS
Size1/2, 3/4, 1 inch

 Duplex Cap ClosuresClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high-density steel and brass to provide the leakage-proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients. 
Yes! I am Interested
Get CALLBACK

CS Cap

CS Cap
 
Ask For Price
Product Price:  Get Latest Price

Product Details:
Material CS
Size1/2, 1, 3/4 inch
Grade ASTM A234 WPB, A420 WPL3, A420

Cap ClosureClosure cap or flats are used to terminate a piping line.We offer an extensive range of Pipe End Closures made to international standards in a wide range to fit tubes of 6mm or ¼ inch to 35/38 mm to 1-1/2 inches. These Pipe End Closures are manufactured by using the high density steel to provide the leakage proof function. These Pipe End Closures are available in different lengths and diameters to serve varied applications and is made of finest quality. This range is available in various size and specification as per the requirement of the clients.Carbon Steel: ASTM A234 WPB, A420 WPL3, A420 WPL6, MSS-SP-75 WPHY 42, 46, 52, 56, 60, 65, 70
Yes! I am Interested
Explore More Products
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
X
Find Us Hardik Sheth (Manager) 77, Prabhu Shri Ram Mandir Marg, Grant Road, Mumbai - 400004, Maharashtra, India
SEND SMS
SEND E-MAIL
Share Us: