Duplex S32750 Washer

Duplex S32750 Tab Washer, Duplex Steel S32750 Spring Washers, Duplex 2507 Washer, Duplex Steel S32750 Tooth Washer, Duplex Steel S32750 Plain Washer, Duplex Steel 2507 Star Washers, DIN 1.4410 Taper Washers, Duplex SAF 2507 Washers Supplier in India.

Duplex Steel S32750/2507 Taper Washer, Duplex S32750 Tab Washer Exporter, Duplex Stainless Steel S32750 Washer, Duplex Steel S32750 Spring Washer, Duplex S32750 Plain Washers, Duplex Steel S32750 Washer Stockholder.

In today’s competitive market, RatnaExports.com is among the leading manufacturers, suppliers, exporters, and stockists of Duplex Steel S32750 Washer. Our main objective is to provide excellent customer service and high-quality products to all our old and new clients. Washers are the most popular products in the market and have been for many years. 

Various washers are available there, including different sizes, grades, ranges, alloys, designations, thicknesses, specifications, grades, and shapes. Aside from this, there are many other reasons why washers are so popular and widely used in various industries.

Washers are thin-looking plates, sometimes square in size, depending on the customer’s specifications. Generally, washers are disk-shaped with a hole in the middle, distributing a load of thread fasteners like bolts or nuts. Insulating steel screws from different aluminum surfaces is essential to prevent galvanic corrosion. A thrust washer is one type of washer used when the rolling element bearing is not needed either because of space constraints or because of cost performance concerns. Other styles and forms of washers include plain, locking, spring washers, etc.

Stainless steel alloy S32750 makes up the Duplex Steel S32750 Washer. As such, it is mainly and extensively supplied in solution-annealed conditions.

Furthermore, it delivers and consists of two main desirable features: ferritic and austenitic grades. Aside from not hardening even under extreme conditions, this product can be strengthened by cold working, as it does not set under extreme conditions. Also, it provides high-yielding strengths, good corrosion resistance, and higher heat conductivity, and it is used at temperatures as high as 300°C. Oil and gas, petrochemical, nuclear power, geothermal, and petrochemical industries are some areas where it is extensively used.

stainless-steel-304-washer-

Contact Ratna Exports today for a best offer & competitive quotation Of Duplex 32750 Washer

Specification of Duplex S32750 Washer

DimensionASTM, DIN, BS, GB, IS, and all International Standards
Length3 mm to 200 mm
Washer SizeM3 – M56 | 3/6″ to 2″ | Custom Sizes
Heat TreatmentAnnealing, Stress Relieving, Case Hardening, Quenching, and Tempering.
TypePlain Washer, Spring Washer, Tooth Washer, Taper Washer, Tab Washer, Star Washer, etc.

 

types of Duplex S32750 Washer

duplex-s32750-washer

Duplex S32750 flat washer

bronze-sqaure-washers

Duplex S32750 Sqaure washer

washer

Duplex S32750 punched washer

Duplex S32750 Star washer

Duplex S32750 Washer Chemical Composition

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Fe

S32750

0.030 max

1.20 max

0.80 max

0.035 max

0.020 max

24.00 – 26.00

3.00 – 5.00

6.00 – 8.00

0.24 – 0.32

58.095 min

S32760

0.05 max

1.00 max

1.00 max

0.030 max

0.010 max

24.00 – 26.00

3.00 – 4.00

6.00 – 8.00

0.20 – 0.30

57.61 min

Mechanical Properties of Duplex S32750 Washer

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750 7.8 0.281 1350 2460

Equivalent Grades for Duplex S32750 Washer

STANDARD WERKSTOFF NR. UNS SAF
Duplex S32750 Washer 1.4410 S32750 2507

Looking to buy Duplex 32750 Washer From a manufacturer in India

Feel free to call or email us to explore how we can assist in growing your business. It would be our pleasure to collaborate with a valued client like you. Please Call On +91 9920228653 Or Mail Us On [email protected]

OTHER TYPES OF Duplex S32750 Washer

Super Duplex Steel S32760 Washer
Super Duplex Steel S32760 Dome Washer
Super Duplex Steel S32760 Hex Washers
ASTM A193 Super Duplex S32760 Tab Washer
S32760 Super Duplex Steel Conical Washers
Super Duplex Steel ASTM A193 S32760 Lock Washer
Super Duplex Steel 1.4410 Cup Washers
Super Duplex S32760 Washers Stockist
Super Duplex UNS S32750 Belleville Washers Supplier
ASME SA193 S32760 Super Duplex Steel Wave Washer
S32760 Super Duplex Steel Bevel Washers
S32760 Super Duplex Steel Sealing Washer
ASME SA193 S32760 Super Duplex Steel Hexagon Washer
Super Duplex Steel 2507 Machine Washer
S32760 Super Duplex Dock Washers Exporter
Super Duplex 2507 Super Duplex Steel Split Lock Washer
Super Duplex Steel UNS S32750/S32760 Hillside Washers Stockholder
ASTM A479 Super Duplex Steel UNS S32760 Split Washer
Super Duplex Steel UNS S32750/S32760 Dock Washer
Super Duplex Steel UNS S32750 Machined Washers
Super Duplex Steel UNS S32760 Lock Washer
Super Duplex Steel UNS S32750/S32760 Tab Washers
INOX 1.4410 Square Washers
Super Duplex Steel UNS S32760 Spherical Washer
Super Duplex Steel UNS S32760 Tooth Lock Washer

Duplex S32750 Washer Standard

ASTM ASTM F436 Washers ASTM F844 Washers ASTM F959 Washers
DIN DIN 125 A (ISO 7089) Washers DIN 125 B (ISO 7090) Washers DIN 126 Washers
DIN 9021 Washers DIN 440 R Washers DIN 7349 Washers
DIN 433 Washers DIN 127 Washers DIN 128 Washers
DIN 434 Washers DIN 435 Washers DIN 1440 Washers
DIN 440v Washers DIN 6903 Washers DIN 6916 Washers
DIN 7349 Washers DIN 7989 Washers
ISO ISO 887:2000 Steel Washers ISO 887/Cor1:2006 Steel Washers ISO 7089:2000 Steel Washers
ISO 7091:2000 Steel Washers ISO 7093-1:2000 Steel Washers ISO 7093-2:2000 Steel Washers
ISO 7094:2000 Steel Washers ISO 4759-3:2016 Steel Washers ISO 7090:2000 Steel Washers
ISO 10644:2009 Steel Washers ISO 10669:1999 Steel Washers ISO 10673:2009 Steel Washers
ISO 9217:2002 Steel Washers ISO 9218:2002 Steel Washers
BS BS 4320 Form A Washers BS 4320 Form B Washers BS 4320 Form C Washers
BS 4320 Form D Washers BS 4395 Washers
IS / AS IS 2016 Washers AS NZS 1252 Washers
JIS JIS B 1186 Washers JIS B 1256 Washers
NF NF E25-513 Z, M Washers NF E25-513 L, LL Washers

Dimensions OF Duplex S32750 Washers

Bolt Size USS SAE
OD (in.) ID (in.) Thickness OD (in.) ID (in.) Thickness
1/8 (#6) 0.375 0.156 .036/.065
5/32 (#8) 0.438 0.188 .036/.065
3/16 (#10) 0.560 0.250 .036/.065 0.500 0.220 .036/.065
7/32 (#12) 0.562 0.250 .051/.080
1/4 (#14) 0.734 0.312 .051/.080 0.625 0.281 .051/.080
5/16 0.875 0.375 .064/.104 0.688 0.344 .051/.080
3/8 1.000 0.438 .064/.104 0.812 0.406 .051/.080
7/16 1.250 0.500 .064/.104 0.922 0.469 .051/.080
1/2 1.375 0.562 .086/.132 1.062 0.531 .074/.121
9/16 1.469 0.625 .086/.132 1.156 0.594 .074/.121
5/8 1.750 0.688 .108/.160 1.312 0.656 .074/.121
3/4 2.000 0.812 .122/.177 1.469 0.812 .108/.160
7/8 2.250 0.938 .136/.192 1.750 0.938 .108/.160
1 2.500 1.062 .136/.192 2.000 1.062 .108/.160
1 1/8 2.750 1.250 .136/.192 2.250 1.250 .108/.160
1 1/4 3.000 1.375 .136/.192 2.500 1.375 .136/.192
1 3/8 3.250 1.500 .153/.213 2.750 1.500 .136/.213
1 1/2 3.500 1.625 .153/.213 3.000 1.625 .153/.213
1 5/8 3.750 1.750 .153/.213
1 3/4 4.000 1.875 .153/.213
1 7/8 4.250 2.000 .153/.213
2 4.500 2.125 .153/.213
2 1/4 4.750 2.375 .320/.248
2 1/2 5.000 2.625 .210/.280
2 3/4 5.250 2.875 .228/.410S
3 5.500 3.125 .249/.327

Weight Chart Of Duplex S32750 Washer

APPROX. WEIGHT IN KGS FOR 100 NOS
SIZE PLAIN PUNCHED WASHER IS:2016 HEAVY WASHER IS:6610 MACHINED WASHER IS:2016 SQUARE | TAPER | WASHERS SPRING WASHER FLAT SECTION IS:3063-72 SPRING WASHER SQUARE SECTION IS:6735-72 DIN: 7980 Size (Inches) PLAIN PUNCHED WASHER BS:3410 TABLE 7
MACHINED HIGH STRENGTH FRICTION GRIP
FOR CHANNELS IS:5372-75 FOR I-BEAM IS:5374-75 TYPE-B (CHANNELS) IS: 6649-85 TYPE-C ( I-BEAMS ) IS: 6649-85
M-3 0.01 0.01
M-4 0.02 0.02
M-5 0.04 0.04 0.03 0.03
M-6 0.11 0.11 0.08 0.04 1/4″ 0.21
M-8 0.20 0.21 1.10 1.20 0.16 0.11 5/16″ 0.35
M-10 0.39 1.60 0.40 1.00 1.10 0.25 0.20 3/8″ 0.48
M-12 0.58 1.90 0.62 2.00 2.20 2.00 1.80 0.38 0.23 1/2″ 1.07
M-14 0.82 0.60 0.38
M-16 1.06 2.90 1.13 3.40 3.75 9.00 8.50 0.89 0.59 5/8″ 1.85
M-18 1.27 0.97 0.66
M-20 1.64 4.40 1.72 5.80 6.70 8.50 8.00 1.52 1.23 3/4″ 2.91
M-22 1.75 7.50 7.00 1.65 1.36 7/8″ 4.27
M-24 3.11 6.30 3.30 13.50 16.00 6.50 6.00 2.62 1.81 1″ 6.13
M-27 3.94 8.00 4.23 12.50 15.00 12.00 11.50 2.87 2.06 1.1/8″ 7.69
M-30 5.05 10.10 5.36 16.50 18.70 17.50 16.00 4.43 3.20 1.1/4″ 9.90
M-33 7.10 12.00 7.54 21.00 23.50 23.00 22.50 6.30 3.50
M-36 8.73 14.60 9.20 25.50 29.20 26.50 26.00 6.73 5.25 1.1/2″ 17.24
M-39 12.60 16.70 13.30 28.30 34.50 7.17 5.61
M-42 17.50 20.10 18.30 11.10 8.00
M-45 21.20 22.20 22.00 11.70 8.53
M-48 28.40 26.00 29.40 12.30 9.00 2″ 27.78
M-52 31.90 33.00 18.20
M-56 47.90 19.30
M-60 51.60 20.30
M-64 55.40 21.80
M-68 57.40
M-72 63.40 24.00

Duplex S32750 Washer, Test Certificates

Ratna Exports, provides Manufacturer TCs (Test Certificates) that comply with EN 10204/3.1B, Raw Materials Certificates, Radiography Test Reports, and Third Party Inspection Reports. In addition to standard certificates, we also provide NACE MR 01075. FERRITE CONTENT as per norms if clients request it.

  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third-Party Inspection Report, etc.

Duplex S32750 Washer Value Added Services

Material Testing:

RatnaExports.com ensures that all materials undergo strict quality tests before dispatch.

  • Tensile testing of areas is an example of mechanical testing
  • Test of hardness
  • Spectroscopic analysis of chemical compounds
  • Testing for Positive Material Identification (PMI)
  • Test for flattening
  • Tests for micros and macros
  • Testing the resistance to pitting
  • Test for flaring
  • Corrosion between grains (IGC) test

Documentation

  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks, and Numbers
  • Certificate of Origin legalized/attested by the Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL-approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)

Duplex S32750 Washer Packaging

There are many industries that use Duplex S32750 Washer, including petrochemicals, oil, and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles, etc. As per international standards, we manufacture all of our Duplex S32750 Washers in wooden cases to ensure no damage during transportation. For exports, wooden cases are the standard packaging. Our Duplex S32750 Washer is marked with grades, lot numbers, sizes, degrees, and our trademark. Upon request, we can carry custom markings as well.

Applications Industry Duplex 32750 Washer