Menu
Ground Finished machined bar 32750’s enhanced strength is also due to its higher molybdenum and chromium content, RatnaExports.com, which makes it more corrosion resistant than standard duplex stainless steel grades. High strength combined with cost-effective corrosion resistance is the benefit of the balanced dual microstructure phase.
Ground Finish machined bars 32750 have the same advantages as their counterparts – lower alloying costs than similar ferritic or austenitic grades. A reduction in the wall size is possible due to its high tensile strength. We can achieve this without compromising quality and strength.
The Ground Finished machined bar 32750 is typically available in solution-annealed condition. Ground Finished machined bar 32750 has a yield strength of approximately 550Mpa in an annealed condition, higher than most grades of austenitic and duplex stainless steel. It also has a higher PREN number. When metals like chromium, molybdenum, and nitrogen are added, a Pitting Resistance Equivalent Number (PREN) of greater than 41 is achieved. Ground Finish machined bar 32750 provides superior pitting and crevice corrosion resistance over austenitic and duplex stainless steels across a wide range of corrosion media and a Critical Pitting Temperature exceeding 50°C compared to austenitic and Ground Finished machined bar 32750 stainless sheets of steel.
| Standard | A variety of ground bars are available, including EN, DIN, JIS, BS, AISI, API, ASTM, ASME |
| Specification | In accordance with ASTM A276, A479 and ASME SA276, SA479 |
| UNS S32750 ground bars special price for | Clients in Dubai, UAE, Singapore, and Malaysia. |
| UNS S32750 ground bars size | The diameter ranges from 3mm to 450mm |
| Length | We can cut lengths from 3 meters to 6 meters according to your specifications |
| UNS S32750 Angle bar size | A sheet of 3mm x 20 mm x 20 mm x 12 mm x 100 mm x 100 mm |
| UNS S32750 Square bar size | 100mm~100mm*100mm |
| UNS S32750 Flat bar size | Two millimeters thick by one hundred millimeters wide |
| Ten millimeters by 500 millimeters | |
| UNS S32750 Hex Bar size | Approximately 2mm by 100mm |
| Element | S32750 |
| C | 0.030 |
| Si | 0.80 |
| Mn | 1.20 |
| P | 0.035 |
| S | 0.020 |
| Cr | 24.0/26.0 |
| Mo | 3.0/5.0 |
| Ni | 6.00/8.00 |
| N | 0.24/0.32 |
| Other | Cu:0.50 |
| Element | S32750 |
| Tensile Strength(MPa) | 795 |
| Proof Stress 0.2% (MPa) | 550 |
| Elongation A5(%) | 15 |
| Hardness Max (HB-HRB) | 310-32* |
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex F53 | 1.4410 | S32750 |
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled, annealed, and pickled |
| P&T | Peeled and turned | RT | Rough-turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Please note this is an approx Super Duplex Steel S32750 Ground Finished Machined Bars price in India. For final S32750 Super Duplex Steel Ground Finished Machined Bars price list please mail us.
The UNS32750 bar is packaged in such a way that it prevents damage during shipping. The purchaser may request a special marking on our products and marking with Grade, Lot No, Size, and our trademark when exporting ground machining UNS31803 bars. In contrast, standard export packaging is done in wooden cases.
At RatnaExports, every ground machining UNS32750 bar and UNS32750 bar hex bar undergoes strict inspections, starting with the material purchase. For conformance to ASTM, ASME, DIN, EN, and JIS codes and standards, we visually inspect them. We appoint certified Inspection Agencies upon request from our clients to witness the material reports, dimensions, and quality conformity of products.
With UNS S32750 Ground Bars, we provide the following details: Mill Test Certificate following EN 10204 3.1, PMI Testing, Test Reports from NABL Approved Laboratories, Third Party Inspection Reports 3.2, Ultrasonic Test Reports, and X-Ray Reports. Additionally, our supplied UNS31803 bar complies with NACE MR 0175 / 0103.
Quick Contact
Our Products