A335 Gr P91 Seamless Pipes

A335 Gr P91 Seamless Pipe Manufacturer, ASME SA335 Grade P91 Alloy Steel Seamless Pipes, Alloy Steel P91 Seamless Pipes, ASME SA335 High Pressure Alloy Pipes, Alloy Steel P91 Pipe Supplier, Alloy Steel Gr.P91 Pipes, ASME SA335 P91 Alloy Steel Seamless Pipes Supplier, Alloy Steel P91 Chrome Moly Pipe Manufacturer in Mumbai, India.

ASTM A335 P91 Alloy Steel Seamless Pipe, SA335 P91 Pipes Manufacturers, P91 AS Hexagonal Pipe, ASTM A335 Grade P91 Seamless Pipes / ASTM A335 Gr P91 Alloy Steel Pipes Stockiest, Alloy Steel P91 EFW Pipes, Alloy Steel P91 Chrome moly Pipes, Alloy Steel P91 Seamless Pipes Manufacturer.

A335 Gr P91 Seamless Pipes are manufactured, stocked and exported by RatnaExports.com, a leading manufacturer, supplier, stockist and exporter of these products. A335 Gr P91 EFW Pipes are an austenitic compound with high elastic and creep strength that can be improved by chilly working. Various industries use these pipes, such as oil & gas, power plants, shipbuilding, and heavy engineering.

We manufacture A335 Gr P91 Seamless Pipes to the highest industry standards, including API, ASTM, ASME, and ANSI. Sulphur chlorinated, water-based cutting fluids work successfully when machining these pipes. These A335 Gr P91 Welded Pipes do not respond to normal aging treatments, but strain aging at relatively low temperatures (700°F – 1100°F) can improve creep and rupture strength when they are placed in service at temperatures less than 1300°F. Check out our huge selection of high-temperature sheet loads of these P91 A335 Gr ERW Pipes or get in touch with proficient for a customized quote.

It is malleable, easy to frame and weld, and has excellent protection from stress consumption breaking in chloride-bearing arrangements (a type of corrosive corrosion to which austenitic iron is inclined).

RatnaExports.com specializes in ASTM A335 / ASME SA335 Grade P91 Alloy Steel Seamless Pipes, ANSI B 36.10, Alloy Steel Gr P91 Seamless Round, P91 Pipe, Square, Rectangular, Hydraulic Pipes with years of experience in exporting. Although these P91 Square Alloy Steel Pipes can be machined using regular procedures, cobalt evaluations of high-speed steel or carbide machines coupled with unbending machine arrangements, as well as positive feeds, are recommended for cobalt tests of high-speed steel or carbide equipments. Alloy Steel P91 Rectangular Pipes that have been subjected to cold work will machine all the more smoothly with no problems. Strongened materials will frame long, tacky chips in a general frame, while cold-worked alloy steel will not cause problems in the end.

Contact Ratna Exports today for a best offer & competitive quotation Of A335 Gr P91 SEAMLESS PIPES

A335 Gr P91 Seamless Pipes Standard Sizes And Schedule Specifications

Specialized in	Sizes in Large Diameter
OD	19.05 milimeter – 114.3 milimeter
WT	2.0 milimeter – 14 milimeter
Length	maximum 16000 milimeter
Form	Square, Hydraulic, Round, Rectangular, Etc.
Standard	SA335 P91, ASTM A335 P91
Thickness	From 3 to 12 milimeter
Size	From 1/2 NB upto 36 NB
Schedule	Schedule 40, 80, 160, XS, XXS
Tolerance	Cold rolled pipe: +/-0.05 milimeter Cold drawn pipe: +/-0.1 milimeter
Craft	Cold drawn / Cold rolled
Type	ERW / Fabricated / Seamless / Welded
Length	Double Random, Cut Length, Single Random, .
Specialized in	SA335 P91
Additional Testing	NACE TM0177, H2 SERVICE, NACE MR0175, IBR, NACE TM0284, SSC TEST, HIC TEST, etc.

Type of A335 Gr P91 Seamless Pipes

a355 p91 alloy 12 inch seamless steel pipes

1/2 " TO 24 " ASTM A335 GR P91 Seamless Pipe

ASME SA335 Grade P91 High Pressure Steel Pipe

Alloy Steel ASTM A335 P91 Pipes

A335 Gr P91 Seamless Pipes Mechanical Strength Table

Elongational	Tensile Properties	HB	Yield Properties
20	585	250	415

Equivalent Material Grade Of A335 Gr P91 Seamless Pipes

UNS	ASTM	Equivalent material	ASME
K91560	A335 P91	K90901, T91, 1.4903, X10CrMoVNb9-1	SA335 P 91

Looking to buy A335 Gr P91 Seamless Pipes From a manufacturer in India?

Feel free to call or email us to explore how we can assist in growing your business. It would be our pleasure to collaborate with a valued client like you. Please Call On +91 9920228653 Or Mail Us On [email protected]

A335 Gr P91 Seamless Pipes Composition Standard

Si, %	Cr, %	C, %	Mo, %	Mn, %	P, %	N, %	S, %	V, %	Ni, %	Nb, %	Al, %
0.2 to 0.5	8.0 to 9.5	0.08 to 0.12	0.85 to 1.05	0.3 to 0.6	0.02	0.03 to 0.07	0.01	0.18 to 0.25	0.4	0.06 to 0.10	0.04

Other A335 Gr P91 Seamless Pipe grades

Tubular Products

Alloy Steel Seamless Pipes & Tubes

ASTM A335 Gr P22, Alloy pipe a335 p11, ASTM A335 Gr P5, ASTM A335 Gr P9, ASTM A335 Gr P12 & ASTM A335 Gr P91

ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

4130

DIN 17175 Seamless Tubes of Heat-resistant Steels

15Mo3; 13CrMo44; 10CrMo910

EN 10216-2 Seamless steel tubes for pressure purposes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

16Mo3; 13CrMo4-5; 10CrMo9-10; 11CrMo9-10; X10CrMoVNb9-1

GOST 8732-78 Seamless Hot-worked Steel Pipes

20Ch; 40Ch; 15ChM; 30ChMA

GOST 8734-75 Seamless cold-formed steel pipes

20Ch; 40Ch; 15ChM

GOST 550-75 Seamless steel tubes for petroleum processing and the petrochemical industry

12ChM; 15Ch5M

TU 14-3R-55-2001 Seamless steel pipes for steam boilers and pipelines

12Ch1MF; 12Ch1MF-PV; 15ChM

TU 14-3-460-2003 Seamless steel tubes for boilers and pipelines

12Ch1MF; 12Ch1MF-PV; 15ChM

GOST 9567-75 Precision steel pipes

20Ch; 15ChM

Main material grades:

DIN standard carbon & alloy steel tubes St37.0/st52.0/DIN 2391/st35.8/TT St 35N/15Mo3/13CrMo44, 10 CrMo910/X20 CrMoV 12 1/X10 CrMo VNb 9 1/15 Ni CuMoNb 5 EN Standard (EN10216-2)

P235GH TC1 &TC2/16Mo3/13CrMo4-5/10CrMo9-10/X20 CrMoV11-1 , X10 CrMoVNb9-1

Please note this is an approx A335 Gr P91 Seamless Pipes price in India. For final A335 Gr P91 Seamless Pipes price list please mail us.

A335 Gr P91 Seamless Pipes Size Chart In Mm

NB	Size	OD	40S	5S	10S	S10	S20	S40	S60	XS/80S	S80	S100	S120	S140	S160	XXS
NB	Size	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm
1/8	10.29	1.2	1.73	2.41
1/4	13.72	1.7	2.24	3.02
3/8	17.15	1.7	2.31	3.2
15	1/2	21.34	2.8	1.7	2.1	2.77	3.73	3.73	4.78	7.47
20	3/4	26.67	2.9	1.7	2.1	2.87	3.91	3.91	5.56	7.82
25	1	33.4	3.4	1.7	2.8	3.38	4.55	4.55	6.35	9.09
32	1 1/4	42.16	3.6	1.7	2.8	3.56	4.85	4.85	6.35	9.7
40	1 1/2	48.26	3.7	1.7	2.8	3.68	5.08	5.08	7.14	10.2
50	2	60.33	3.9	1.7	2.8	3.91	5.54	5.54	9.74	11.1
65	2 1/2	73.03	5.2	2.1	3.1	5.16	7.01	7.01	9.53	14
80	3	88.9	5.5	2.1	3.1	5.49	7.62	7.62	11.1	15.2
90	3 1/2	101.6	5.7	2.1	3.1	5.74	8.08	8.08
100	4	114.3	6	2.1	3.1	6.02	8.56	8.56	11.1	13.5	17.1
125	5	141.3	6.6	2.8	3.4	6.55	9.53	9.53	12.7	15.9	19.1
150	6	168.3	7.1	2.8	3.4	7.11	10.97	11	14.3	18.3	22
200	8	219.1	8.2	2.8	3.8	6.4	8.18	10.3	12.7	12.7	15.1	19.3	20.6	23	22.2
250	10	273.1	9.3	3.4	4.2	6.4	9.27	12.7	12.7	15.1	19.3	21.4	25.4	28.6	25.4
300	12	323.9	9.5	4	4.6	6.4	10.3	14.3	12.7	17.5	21.4	25.4	28.6	33.3	25.4
350	14	355.6	9.5	4	4.8	6.4	7.9	11.1	15.1	12.7	19.1	23.8	27.8	31.8	35.7
400	16	406.4	9.5	4.2	4.8	6.4	7.9	12.7	16.7	12.7	21.4	26.2	31	36.5	40.5
450	18	457.2	9.5	4.2	4.8	6.4	7.9	14.3	19.1	12.7	23.8	29.4	34.9	39.7	45.2
500	20	508	9.5	4.8	5.5	6.4	9.5	15.1	20.6	12.7	26.2	32.5	38.1	44.5	50
550	22	558.8	9.5	4.8	5.5	6.4	9.5	22.2	12.7	28.6	34.9	41.3	47.6	54
600	24	609.6	9.5	5.5	6.4	6.4	9.5	17.5	24.6	12.7	31	38.9	46	52.4	59.5
650	26	660.4	9.5	7.9	13	12.7
700	28	711.2	9.5	7.9	13	12.7
750	30	762	9.5	6.4	7.9	7.9	13	12.7
800	32	812.8	9.5	7.9	13	17.5	12.7
850	34	863.6	9.5	7.9	13	17.5	12.7
900	36	914.4	9.5	7.9	13	19.1	12.7

A335 Gr P91 Seamless Pipe Elongation Requirements

Calculated Minimum Elongation Values
Elongation in 2 in. or 50 mm, min %
Wall Thickness		P5, P9, P11, P22		P91
in.	mm	Longitudinal	Transverse	Longitudinal
5/16 (0.312)	8	30	20	20
9/32 (0.281)	7.2	28	19	19
1/4 (0.250)	6.4	27	18	18
7/32 (0.219)	5.6	26	17
3/16 (0.188)	4.8	24	16
5/32 (0.156)	4	22	15
7/8 (0.125)	3.2	21	14
3/32 (0.094)	2.4	20	13
1/18 (0.062)	1.6	18	12

P91 Steel Pipe Material, P91 Ferritic Alloy Steel Pipe, SA 335 Grade P91 Alloy Steel Welded Pipes Exporter in India, Check ASME SA335 Grade P91 Alloy Steel Seamless Pipe Dimension Chart.

ASTM A335 Gr P91 NACE MR0175 Seamless Pipe Standards

Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation Min (vertical bar specimen )%	Elongation Min (round bar specimens )%	Squash
ASTM A335/A335M-03 “high-temperature ferritic alloy steel seamless”		P1, P2	≥ 205	≥ 380	30	22	H
		P12	≥ 220	≥ 415	30	22	H
		P23	≥ 400	≥ 510	20	20	H
		P91	≥ 415	≥ 585	20	20	H
		Other	≥ 205	≥ 415	30	22	H
Note: For vertical bar specimens with wall thickness less than 8mm, each reduction 0.8mm, P23, P91 should subtract 1.0%, 1.5% of base elongation, minus all other grades.
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation%	Squash
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation%	Squash
ASTM A500-2001 “Structural carbon steel cold-formed and shaped circular cross-section welded steel pipe and seamless steel pipe.”		Grade A	≥ 228	≥ 310	≥ 25	H
		Grade B	≥ 290	≥ 400	≥ 23	H
		Grade C	≥ 317	≥ 427	≥ 21	H
		Grade D	≥ 250	≥ 400	≥ 23	H
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation%	Squash	Flaring
ASTM A556M-96 “water heater with carbon steel cold drew seamless steel tubes.”		A2	≥ 180	≥ 320	≥ 35	H	H
		B2	≥ 260	≥ 410	≥ 30	H	H
		C2	≥ 280	≥ 480	≥ 30	H	H
Standard		Steel grade	Yield strength	Tensile strength	Elongation (%)
Standard		Steel grade	Yield strength	Tensile strength	Elongation (%)
JIS G 3473-1988 “Carbon steel cylinder”		STC370	≥ 215	≥ 370	≥ 30	Note: thickness <8mm pipe, elongation is reduced by the minimum thickness at 1mm, to subtract the elongation of 1.5%.
		STC440	≥ 305	≥ 440	≥ 10
		STC510A	≥ 380	≥ 510	≥ 10
		STC510B	≥ 380	≥ 510	≥ 15
		STC540	≥ 390	≥ 540	≥ 20
		STC590A	≥ 490	≥ 590	≥ 10
		STC590B	≥ 490	≥ 590	≥ 15
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation %	Squash
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation %	Squash
JIS G 3467-1988 “furnace with steel.”		STF410	≥ 245	≥ 410	≥ 24	0.08	Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
		STFA12	≥ 205	≥ 380	≥ 24
		STFA22	≥ 205	≥ 410	≥ 24
		STFA23	≥ 205	≥ 410	≥ 24
		STFA24	≥ 205	≥ 410	≥ 24
		STFA25	≥ 205	≥ 410	≥ 24
		STFA26	≥ 205	≥ 410	≥ 24
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation %	Squash
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation %	Squash
JIS G 3462-1988 “boilers, heat exchangers used in steel pipe.”		STBA12	≥ 205	≥ 380	≥ 30	0.08
		Other	≥ 205	≥ 410	≥ 30	0.08
Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
Standard		Steel grade	Wall thickness mm	Yield strength M Pa	Tensile M Pa	Elongation%	Flattening / Flaring
JIS G 3461-1988 “boilers, heat exchangers used in carbon steel.”		STB340	≥ 8	≥ 175	≥ 340	≥ 35	H
		STB410	≥ 8	≥ 255	≥ 410	≥ 25	H
		STB510	≥ 8	≥ 295	≥ 510	≥ 25	H
Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
Standard	Steel grade	Yield strength P a	Tensile M Pa	Elongation (vertical bar specimen ) %	Elongation ( round bar specimens )%	Squash	Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
JIS G 3456-1988 “high carbon steel pipes.”	STPT370	≥ 215	≥ 370	≥ 30	≥ 28	0.08
	STPT410	≥ 245	≥ 410	≥ 2 5	≥ 24	0.07
	STPT480	≥ 275	≥ 480	≥ 2 5	≥ 22	0.07
Standard		Steel grade	Yield strength	Tensile strength	Elongation ( tube sections and longitudinal strips sample) %	Elongation (round bar specimens )%	Squashed or bent
JIS G 3455-1988 “high carbon steel pipes.”		STS370	≥ 215	≥ 370	≥ 30	≥ 28	H
		STS410	≥ 245	≥ 410	≥ 25	≥ 24	H
		STS480	≥ 275	≥ 480	≥ 25	≥ 22	H
Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
Standard		Steel grade	Yield strength P a	Tensile M Pa	Elongation ( vertical bar specimen )%	Elongation ( round bar specimens )%	Squash
JIS G 3454-1988 “pressure pipes carbon steel pipe.”		STPG370	≥ 215	≥ 370	≥ 30	≥ 28	0.08
		STPG410	≥ 245	≥ 410	≥ 2 5	≥ 24	0.07
		Note: using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.

A335 Gr P91 Seamless Pipe Surface Finish

Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap.

End Finishes: Beveled, Square Cut, Threaded & Coupled.

ASTM A335 P91 Seamless Pipe Composition Comparison

Grade	UNS	C≤	Mn	P≤	S≤	Si≤	Cr	Mo
P1	K11522	0.10~0.20	0.30~0.80	0.025	0.025	0.10~0.50	–	0.44~0.65
P2	K11547	0.10~0.20	0.30~0.61	0.025	0.025	0.10~0.30	0.50~0.81	0.44~0.65
P5	K41545	0.15	0.30~0.60	0.025	0.025	0.50	4.00~6.00	0.44~0.65
P5b	K51545	0.15	0.30~0.60	0.025	0.025	1.00~2.00	4.00~6.00	0.44~0.65
P5c	K41245	0.12	0.30~0.60	0.025	0.025	0.50	4.00~6.00	0.44~0.65
P9	S50400	0.15	0.30~0.60	0.025	0.025	0.50~1.00	8.00~10.00	0.44~0.65
P11	K11597	0.05~0.15	0.30~0.61	0.025	0.025	0.50~1.00	1.00~1.50	0.44~0.65
P12	K11562	0.05~0.15	0.30~0.60	0.025	0.025	0.50	0.80~1.25	0.44~0.65
P15	K11578	0.05~0.15	0.30~0.60	0.025	0.025	1.15~1.65	–	0.44~0.65
P21	K31545	0.05~0.15	0.30~0.60	0.025	0.025	0.50	2.65~3.35	0.80~1.60
P22	K21590	0.05~0.15	0.30~0.60	0.025	0.025	0.50	1.90~2.60	0.87~1.13
P91	K91560	0.08~0.12	0.30~0.60	0.020	0.010	0.20~0.50	8.00~9.50	0.85~1.05
P92	K92460	0.07~0.13	0.30~0.60	0.020	0.010	0.50	8.50~9.50	0.30~0.60

A335 Gr P91 Seamless Pipes Test Certificates

At GIC, we provide Manufacturer TCs (Test Certificates) in accordance with EN 10204/3.1B, Raw Materials Certificates, 100% Radiography Test Reports, and Third Party Inspection Reports. We also provide standard certificates like EN 10204 3.1 and additional requirements. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.

EN 10204/3.1B,
Raw Materials Certificate
100% Radiography Test Report
Third-Party Inspection Report, etc

A335 Gr P91 Material Testing

We at RatnaExports.com ensure that all our materials go through strict quality tests before dispatching them to our clients.

Mechanical Testing Such as Tensile of Area
Hardness Test
Chemical Analysis – Spectro Analysis
Positive Material Identification – PMI Testing
Flattening Test
Micro and MacroTest
Pitting Resistance Test
Flaring Test
Intergranular Corrosion (IGC) Test

A335 Gr P91 Documentation

Commercial Invoice which includes HS Code

Packing List including net weight and gross weight, number of boxes, Marks, and Numbers

Certificate of Origin legalized/attested by the Chamber of Commerce or Embassy

Fumigation Certificates

Raw Material Test Reports

Material Traceability Records

Quality Assurance Plan (QAP)

Heat Treatment Charts

Test Certificates certifying NACE MR0103, NACE MR0175

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2

Guarantee Letter

NABL-approved Laboratory Test Reports

Welding Procedure Specification/Procedure Qualification Record, WPS/PQR

Form A for the purposes of the Generalized System of Preferences (GSP)

A335 Gr P91 Seamless Pipes Packaging

A wide range of industries utilizes A335 Gr P91 Seamless Pipes, including petrochemicals, oil, and gas, power generation, bulk liquid transportation, chemicals, pharmaceuticals, pulp and paper manufacturing, textiles, etc. In accordance with international standards, we manufacture all our A335 Gr P91 Seamless Pipes, packaged in wooden cases so that there is no damage during transportation. For exports, standard export packaging is done in wooden cases. The A335 Gr P91 Seamless Pipes we offer are marked with grades, lot numbers, sizes, degrees, and our trademark. On special request, A335 Gr P91 Seamless Pipes can also carry custom markings.

Applications Industry A335 Gr P91 Seamless Pipes

our Products

Core Products

Get the Best Quote

Have A Questions? Call Now!

+91 9920228653